【摘要】：以十字形焊接節點為研究對象,比較ABAQUS、FRANC3D和規范公式計算表面裂紋應力強度因子的結果,驗證FRANC3D計算應力強度因子的正確性和高效性。為從數值理論上研究復雜應力場下焊接節點表面裂紋復合型應力強度因子的影響因素,基于FRANC3D建立不同裂紋形狀比和焊縫傾斜角度的計算模型。結果表明:隨著焊縫傾斜角度的增大,Ⅰ型和Ⅲ型應力強度因子減小,Ⅱ型應力強度因子增大;當焊縫傾斜角度為0°和15°時,裂紋表面點和最深點同時可以忽略Ⅱ型和Ⅲ型應力強度因子的影響;應考慮Ⅱ型和Ⅲ型應力強度因子絕對值對疲勞裂紋擴展的影響。
[Abstract]:The results of calculation of surface crack stress intensity factor by Abaqus FRANC3D and the standard formula are compared with the cross welded joints. The correctness and efficiency of the calculation of the stress intensity factor by FRANC3D are verified. In order to study the influence factors of composite mode stress intensity factor of welded joint surface crack under complex stress field in numerical theory, the calculation model of different crack shape ratio and weld inclination angle is established based on FRANC3D. The results show that the stress intensity factor of type 鈪，

本文編號：2197105