本文選題：液艙晃蕩　切入點：CIP法　出處：《工程力學》2016年08期 　論文類型：期刊論文

【摘要】：數值模擬是求解液艙晃蕩問題的重要方法�；贑IP方法,該文建立了有限差分法求解二維不可壓縮流體的Navier-Stokes方程的數值模型,使用對時間積分的分步算法求解流場,利用THINC格式捕捉自由液面,將液艙晃蕩問題視為包括氣體、液體和固體的多相流問題。分別模擬了無隔板和帶縱隔板的液艙晃蕩。該模型可以模擬晃蕩過程中自由面破碎、翻卷和對艙壁的沖擊壓力以及隔板附近渦的生成與脫落,模型在不同網格的計算結果一致,并將計算結果與試驗結果進行了對比。結果表明:該模型可以較好地模擬液艙晃蕩問題并且縱隔板對液艙晃蕩有明顯的抑制作用。
[Abstract]:Numerical simulation is an important method to solve sloshing problem of tank. Based on CIP method, a numerical model of solving Navier-Stokes equation of two-dimensional incompressible fluid by finite difference method is established in this paper. The free liquid level is captured by THINC scheme, and the sloshing problem of liquid tank is regarded as a multiphase flow problem including gas, liquid and solid. The sloshing of tank without diaphragm and with mediastinal plate can be simulated by this model, which can simulate the breakage of free surface during sloshing. The rolling and impact pressure on the bulkhead and the formation and shedding of vortices near the partition are consistent with the results of the model on different meshes. The calculated results are compared with the experimental results. The results show that the model can well simulate the sloshing problem of tanks and the mediastinal plate can obviously inhibit the sloshing of tanks.
【作者單位】： 中國海洋大學工程學院;
【基金】：國家自然科學基金項目(51279186,51479183) 國家留學基金項目(201406335003)
【分類號】：O359

【相似文獻】

相關期刊論文 前4條

1 張雨新;萬德成;日野孝則;;MPS方法數值模擬液艙晃蕩問題[J];海洋工程;2014年04期

2 張雨新;萬德成;;MPS方法在二維液艙晃蕩中的應用[J];復旦學報(自然科學版);2013年05期

3 劉富;童明波;陳建平;;基于SPH方法的三維液體晃動數值模擬[J];南京航空航天大學學報;2010年01期

4 ;[J];;年期

，

本文編號：1585371