發布時間：2019-08-03 17:36

【摘要】：刨鏈預緊力是影響刨煤機運行的重要工況參數。分析刨鏈預緊力對刨煤機運行的影響,得到了刨削時和空行程時刨鏈預緊力及預緊力選取范圍的計算公式�？紤]刨鏈繞經鏈輪時曲線阻力的影響,采用逐點張力法得出刨鏈總牽引力的計算公式。定量分析了預緊力變化對刨鏈總牽引力及刨煤機能耗的影響,結果表明:預緊力增加,刨煤機能耗明顯增大。并通過自制的刨煤機試驗臺,對空行程時不同預緊力條件下的刨煤機功率進行測試,試驗結果更加說明了預緊力對能耗的顯著影響。為合理選取刨鏈預緊力、刨煤機設計和使用中的節能降耗提供理論基礎。
[Abstract]:The pretightening force of planer chain is an important working condition parameter that affects the operation of coal planer. The influence of pretightening force of planer chain on the operation of planer is analyzed, and the formulas for calculating the pretightening force of planing chain and the selection range of pretightening force during planing and space stroke are obtained. Considering the influence of the curve resistance of the planing chain around the sprocket, the formula for calculating the total traction force of the planing chain is obtained by using the point-by-point tension method. The influence of the change of pretightening force on the total traction force of planer chain and the energy consumption of planer is analyzed quantitatively. The results show that the energy consumption of planer increases obviously with the increase of pretightening force. Through the self-made planer test bench, the power of the planer under different pretightening forces during the empty stroke is measured, and the test results show that the pretightening force has a significant influence on the energy consumption. It provides a theoretical basis for reasonable selection of pretightening force of planer chain and energy saving and consumption reduction in the design and use of planer.
【作者單位】： 遼寧工程技術大學機械工程學院;
【基金】：國家自然科學基金資助項目(51104082) 中國煤炭工業協會2011年度科學技術研究指導性計劃資助項目(MTKJ2011-330)
【分類號】：TD421.62

【相似文獻】

相關期刊論文 前5條

1 康曉敏;李貴軒;;隨機動載荷作用下刨煤機刨鏈疲勞壽命預測[J];煤炭學報;2010年03期

2 張強;付云飛;胡南;;溫度/機械載荷作用下高強度刨鏈裂紋擴展的隨機化分析[J];材料導報;2013年S1期

3 趙麗娟;劉旭南;張建軍;孫中剛;;刨煤機刨鏈回轉接頭的可靠性[J];機械設計與研究;2013年03期

4 張強;付云飛;;基于NSGA-Ⅱ算法任意分布參數刨鏈嚙合運動精度可靠性穩健設計[J];煤炭學報;2013年03期

5 ;[J];;年期

相關博士學位論文 前1條

1 康曉敏;刨煤機動力學分析及對刨鏈可靠性影響的研究[D];遼寧工程技術大學;2009年

，

本文編號：2522688