【摘要】：帶式輸送機是煤礦最主要的運煤設備。對于開采多年的煤礦,地質條件變的復雜,常會出現原有帶式輸送機無法適應生產條件的現象。為擴大帶式輸送機的使用范圍,提高其使用效率,有必要對帶式輸送機進行適應性技術改造。本文通過設計短距離巖石運輸裝置、帶式輸送機強制轉彎裝置,成功的實現了可伸縮帶式輸送機的短距離運輸與轉彎運行。通過對購置的輸送機集中控制系統進行PLC編程,保證了系統與生產條件的高度適應,為DP礦的煤炭、巖石運輸提供設備保障。1)短距離巖石運輸裝置在DSJ80可伸縮帶式輸送機基礎上改造而成,通過重新設計機頭部分及張緊裝置,選擇合理的驅動裝置,較好的解決了短距離巷道巖石運輸困難的問題。2)結合帶式輸送機轉彎處托輥組一般結構的參數,設計了一種通用的增設立輥的帶式輸送機強制轉彎裝置。小角度轉彎時,通過加裝立輥模擬一般結構的各參數,實現非強制轉彎,轉彎角度較大時,通過加裝立輥及壓輥,實現強制轉彎。3)通過自行編程,開發出一套適合本礦井生產模式的工作面輸送機集中控制系統,降低了維護成本,提高了系統的故障處理與應急能力。目前礦用帶式輸送機適應性技術改造的成果已在DP礦已成功應用,運行良好,實現了設計要求,為生產提供了必要的設備保障。
[Abstract]:Belt conveyor is the most important coal transportation equipment in coal mine. For coal mines which have been exploited for many years, the geological conditions become complex, and the original belt conveyor is often unable to adapt to the production conditions. In order to expand the application range of belt conveyor and improve its use efficiency, it is necessary to carry out adaptive technical transformation of belt conveyor. In this paper, the short distance rock transportation device and the forced turning device of belt conveyor are designed, and the short distance transportation and turning operation of retractable belt conveyor are successfully realized. Through PLC programming of the centralized control system of the conveyor, the high adaptability of the system to the production conditions is guaranteed, which is the coal of DP mine. Rock transportation provides equipment support. 1) the short distance rock transportation device is modified on the basis of DSJ80 retractable belt conveyor. By redesigning the head part and tensioning device, the reasonable driving device is selected. The problem of rock transportation in short distance roadway is solved well. 2) combined with the parameters of the general structure of the roller group at the bend of the belt conveyor, a general forced turning device of belt conveyor with vertical roller is designed. When turning at a small angle, the parameters of the general structure are simulated by adding the vertical roller to realize the non-forced turning, and when the turning angle is large, the forced turning is realized by adding the vertical roll and the pressing roller. 3) by self-programming, A set of centralized control system of working face conveyor suitable for the production mode of the mine is developed, which reduces the maintenance cost and improves the fault treatment and emergency ability of the system. At present, the achievements of adaptive technical transformation of mining belt conveyor have been successfully applied in DP Mine, running well, realizing the design requirements, and providing the necessary equipment guarantee for production.
【學位授予單位】：華北電力大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TD528.1

【參考文獻】

相關期刊論文 前10條

1 房忠偉;;帶式輸送機轉彎裝置在煤礦井下的研究觀察[J];山東工業技術;2016年18期

2 楊蘭峰;;國內外帶式輸送機的現狀及發展趨勢[J];機械管理開發;2016年04期

3 曲建平;;煤礦帶式輸送機現狀與發展趨勢[J];煤炭科技;2015年04期

4 杜新利;霍震海;翟小軍;;帶式輸送機平面轉彎技術在煤礦井下的應用[J];技術與市場;2015年10期

5 周釗;;電廠輔助車間程控系統PLC選型和設計的初探[J];上海節能;2015年08期

6 孫鴻;;帶式輸送機張緊裝置的應用[J];科技資訊;2015年01期

7 徐靜;;帶式輸送機轉彎裝置的應用[J];科技視界;2014年10期

8 王玉芳;;基于PLC的礦井帶式輸送機監控系統[J];煤礦機械;2014年02期

9 李秦琪;;在水平拐彎巷道內實現皮帶連續運輸所用皮帶拐彎裝置的研究與應用[J];科技資訊;2013年04期

10 朱立平;蔣衛良;;適用于我國煤礦帶式輸送機典型機型的研究[J];煤炭學報;2010年11期

相關重要報紙文章 前1條

1 陳俊琦;;煤企如何應對“后黃金時代”[N];山西日?qǐng)?bào);2013年

相關碩士學位論文 前2條

1 王興省;彎曲運行帶式輸送機轉彎設計的研究[D];西安理工大學;2007年

2 戰悅暉;平面轉彎帶式輸送機變坡轉彎理論的研究[D];東北大學;2006年

，

本文編號：2495541