【摘要】：為提高泡沫材料的發泡倍數并降低成本,進行了固體泡沫特性及其添加無機物(黃沙)的實驗研究.通過分析原料A馬麗散與發泡劑B在不同配比下混合及混合加沙后固體泡沫的發泡特性,找出最佳配比和最佳含沙質量分數使發泡倍數最大,對比分析添加無機物前后的經濟成本,并在天池礦102尾巷采空區進行了現場應用研究.結果表明:原料A馬麗散、發泡劑B的最佳配比為1:1.2,當含沙質量分數為25%時發泡倍數最大為14.220且防滅火效果較好.
[Abstract]:In order to improve the foaming ratio of foam materials and reduce the cost, the properties of solid foam and the addition of inorganic material (yellow sand) were studied. By analyzing the foaming characteristics of solid foams mixed with foaming agent B and raw material A Marisan and mixed with Gaza in different proportions, it was found out that the best mix ratio and the best mass fraction of sand had the highest foaming multiple. The economic cost before and after the addition of inorganic matter was analyzed, and the field application study was carried out in 102 mined-out areas of Tianchi Coal Mine. The results show that the best ratio of foaming agent B is 1: 1.2, when the mass fraction of sand is 25, the maximum foaming multiple is 14.220 and the fire extinguishing effect is better.
【作者單位】： 遼寧工程技術大學安全科學與工程學院;礦山熱動力災害與防治教育部重點實驗室;
【基金】：國家自然科學基金項目(51274115) 遼寧省教育廳項目(L2012122)
【分類號】：TD752.2
，

本文編號：2354286