【摘要】：平朔二礦1103采面為11煤的首采工作面,1103采面需要在近距離9煤采空區及遺留煤柱下進行開采。近距離采空區下大采高綜采技術在平朔礦區屬于首次應用,首采面礦壓規律的總結對其他工作面的后續開采具有重要的指導意義。同時由于開采條件特殊,礦壓規律較復雜,需要獲得大量的現場監測數據。人工分析不僅工作量大,而且準確率和效率將會非常低,需要開發礦壓規律分析軟件來實現來壓參數及支架運行參數的自動化分析。論文針對1103采面,采用現場調研、試驗室煤巖物理力學參數測定、現場礦壓監測和理論分析的方法研究了該工作面的礦壓規律�，F(xiàn)場調研取樣,獲得井工二礦地質資料概況以及11煤和頂板巖石試件,在學校試驗室采用W4—130型萬能試驗機、YES-200型數顯單軸壓縮試驗機和YJ—5型電阻應變儀,通過單軸抗壓強度試驗和劈裂法抗拉試驗測定煤巖試件的物理力學指標。通過現場監測,獲得支架工作阻力、頂?shù)装逡平约安擅嫫瑤兔绊斍闆r。運用VB語言開發礦壓規律分析軟件,通過獲得的監測數據計算1103采面的來壓步距及來壓強度等一系列來壓參數和支架運行參數。最后通過分析數據處理結果總結1103采面的礦壓規律。論文成功總結了1103采面的礦壓規律,同時對支架適用性進行了評價總結。研究成果對該礦具有重要意義,不僅為后續工作面安全生產提供了重要依據,也為后續支架選型提供了參考。同時國內對VB語言開發軟件分析礦壓規律的研究較少,可以為其他礦井礦壓規律研究方法的選擇提供借鑒。
[Abstract]:The 1103 face of Pingshuo No.2 Mine is the first mining face of 11 coal, and the 1103 face needs to be mined in the close distance 9 coal goaf and under the remaining coal pillar. Fully-mechanized mining technology with large mining height under close goaf is the first time to be applied in Pingshuo mining area. The summary of the law of mine pressure on the first mining face has important guiding significance for the subsequent mining of other working faces. At the same time, because of the special mining conditions and complex rules of mine pressure, a large number of field monitoring data need to be obtained. Manual analysis is not only a heavy workload, but also the accuracy and efficiency will be very low. It is necessary to develop the analytical software to realize the automatic analysis of the pressure parameters and the operating parameters of the support. Aiming at the 1103 mining face, this paper studies the law of mine pressure in this working face by means of field investigation, physical and mechanical parameters measurement of coal and rock in laboratory, on-site monitoring of mine pressure and theoretical analysis. Through field investigation and sampling, the geological data of Jinggong No.2 Mine and 11 coal and roof rock samples were obtained. W4-130 universal testing machine, YES-200 digital display uniaxial compression tester and YJ-5 resistance strain gauge were used in the school laboratory. The physical and mechanical indexes of coal and rock specimens were measured by uniaxial compressive strength test and splitting tensile test. Through the field monitoring, the working resistance of the support, the roof and bottom plate moving close and the roof falling from the mining face are obtained. By using VB language to develop the analysis software of rock pressure law, a series of pressure parameters and support operation parameters, such as the pressure step distance and pressure intensity of 1103 mining face, are calculated by the monitoring data obtained. Finally, the rock pressure law of 1103 mining face is summarized by analyzing the data processing results. In this paper, the rock pressure law of 1103 face is summarized successfully, and the applicability of the support is evaluated and summarized at the same time. The research results are of great significance to the mine, which not only provides an important basis for the safety production of the subsequent working face, but also provides a reference for the selection of the follow-up support. At the same time, there are few researches on the analysis of mine pressure law by VB language, which can be used as a reference for other mine pressure law research methods.
【學位授予單位】：遼寧工程技術大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TD323

【參考文獻】

相關期刊論文 前10條

1 谷拴成;陳盼;王建文;;近距離煤層采空區下工作面礦壓顯現規律研究[J];煤炭工程;2014年05期

2 孫剛;周華平;孫克雷;;基于支持向量機的礦壓監測數據預測研究[J];阜陽師范學院學報(自然科學版);2013年03期

3 李潞斌;;基于無線傳感器網絡的礦山壓力監測系統設計及應用[J];煤炭工程;2012年12期

4 栗建平;;淺埋深近距離煤層開采礦壓規律研究[J];科技創業家;2012年15期

5 張偉;;近距離煤層采空區下綜采工作面礦壓顯現規律[J];煤礦開采;2011年06期

6 陳輝;周文超;魏永強;劉偉娜;張云;閆冠宇;張瑞萍;;礦壓缺失數據插值算法研究[J];工礦自動化;2011年11期

7 姜鵬飛;康紅普;張劍;林健;司林坡;;近距煤層群開采在不同寬度煤柱中的傳力機制[J];采礦與安全工程學報;2011年03期

8 鄧雪杰;殷偉;張強;安百富;;近距離煤層下行開采礦壓顯現規律相似模擬研究[J];煤礦開采;2011年03期

9 李瑞群;王智欣;;近距離煤層下層開采過集中煤柱礦壓顯現研究[J];神華科技;2011年02期

10 屠世浩;竇鳳金;萬志軍;王方田;袁永;;淺埋房柱式采空區下近距離煤層綜采頂板控制技術[J];煤炭學報;2011年03期

，

本文編號：2276377