【摘要】：煤炭是我國工業生產重要的能源和原材料,充填開采技術作為一種綠色環保的開采技術能夠有效提高煤礦的煤炭采出率,實現資源的充分利用,同時能夠有效保護周邊自然環境。新型的超高水充填開采技術能夠有效保證“三下”開采安全,最大限度的收回礦產資源,延長礦井開采年限,同時保護地下、地表環境,減少地表沉降。超高水充填技術具有相對簡單的工藝系統,前期投入較低,充填效果好等特點。超高水充填技術的運用主要依托于建設于地表的充填站和通入礦井中的充填管道,而高水充填站是其中最重要的組成部分。論文主要研究的是冀中能源九龍礦超高水充填項目,根據工程實際對項目所用到的機械設備采用新的設計方法進行設計和優化,首先對充填開采技術發展現狀進行簡單的介紹,結合樣本工程對超高水充填站的結構和設備布置進行介紹,并闡述了設備的工作流程。其次闡述參數化設計原理及其發展過程,并對本文運用到的SolidWorks軟件進行介紹。通過參考九龍礦超高水充填站的設計圖紙,運用SolidWorks軟件的繪圖功能建立充填站中各主要設備的參數化模型,并以此為基礎構建整套系統參數化設計的模型庫,運用系列零件設計表方法對運用到的高水充填設備進行參數化設計,實現非標設備的標準化設計。利用軟件的裝配功能對整個充填站的建設過程進行模擬,發現潛在的設計問題,并提出相應的解決方案。最后確定整套系統的設備裝配次序,對實際工程起到指導作用。
[Abstract]:Coal is an important source of energy and raw materials for industrial production in China. As a kind of green and environmental protection mining technology, filling mining technology can effectively improve the coal mining rate of coal mines and realize the full utilization of resources. At the same time, can effectively protect the surrounding natural environment. The new super-high water filling mining technology can effectively guarantee the safety of "three down" mining, maximize the recovery of mineral resources, prolong mine mining life, at the same time protect underground, surface environment and reduce surface subsidence. Super-high-water filling technology has the characteristics of relatively simple process system, low pre-investment, good filling effect and so on. The application of ultra-high water filling technology mainly depends on the filling station built on the surface and the filling pipe through the mine, in which the high water filling station is the most important part. This paper mainly studies the super-high water filling project in Jizhong Energy Jiulong Mine. According to the engineering practice, the new design method is used to design and optimize the mechanical equipment used in the project. Firstly, the development status of filling mining technology is briefly introduced. The structure and equipment arrangement of super high water filling station are introduced with sample engineering, and the working flow of the equipment is expounded. Secondly, the principle of parameterized design and its development process are described, and the SolidWorks software used in this paper is introduced. By referring to the design drawings of the super high water filling station in Jiulong Mine, the parameterized model of the main equipment in the filling station is established by using the drawing function of the SolidWorks software, and the model base of the whole system parameterized design is constructed on this basis. The parameterized design of high water filling equipment is carried out by using the method of series parts design table, and the standardized design of non standard equipment is realized. The software assembly function is used to simulate the construction process of the filling station, to find the potential design problems, and to put forward the corresponding solutions. Finally, the equipment assembly order of the whole system is determined, which plays a guiding role in practical engineering.
【學位授予單位】：河北工程大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TD823.7

【參考文獻】

相關期刊論文 前10條

1 張建公;郭科偉;張步勤;王桂梅;;充填膏體制備及泵送監控系統設計及應用[J];煤炭科學技術;2013年09期

2 賈凱軍;馮光明;李風凱;;礦用超高水充填材料制漿系統研究與應用[J];山東科技大學學報(自然科學版);2011年06期

3 馮光明;王成真;李鳳凱;賈凱軍;;超高水材料袋式充填開采研究[J];采礦與安全工程學報;2011年04期

4 馮光明;孫春東;王成真;周振;;超高水材料采空區充填方法研究[J];煤炭學報;2010年12期

5 馮光明;丁玉;朱紅菊;柏建彪;;礦用超高水充填材料及其結構的實驗研究[J];中國礦業大學學報;2010年06期

6 石建新;;高水膨脹材料充填采煤技術的研究與應用[J];山東煤炭科技;2010年04期

7 成龍;張奕黃;施洪生;;基于VB的SolidWorks標準件庫的二次開發與實例[J];微計算機信息;2010年10期

8 高武;;實施矸石膏體充填采煤的探索與實踐[J];中國煤炭;2009年10期

9 趙會芳;崇凱;姜旭升;郭德響;;基于SolidWorks夾具通用件的參數化設計及實現[J];機床與液壓;2009年08期

10 郭海利;陳松;;淺談鋼貯倉結構設計要點[J];山西建筑;2009年12期

，

本文編號：2263451