【摘要】：為了避免采煤機零件有限元分析繁瑣的前處理設置和降低有限元分析的門檻,提高采煤機零件有限元分析效率,對采煤機零件的參數化CAE分析方法進行研究,綜合利用UG(Unigraphics NX)二次開發工具和VS2012編程軟件開發了基于UG的采煤機零件參數化CAE分析系統。該系統可在UG軟件中直接進行零件參數化CAE分析,可直接調用前處理對話框進行有限元分析前處理的設置,通過程序直接調用解算求解器完成分析過程,實現了采煤機關鍵零件參數化CAE分析全過程,避免了以往不同軟件轉換造成的數據丟失問題,提高了分析效率。實例驗證了該系統的有效性。
[Abstract]:In order to avoid the complicated pre-processing setting and reduce the threshold of finite element analysis of shearer parts, and improve the efficiency of finite element analysis of shearer parts, the parameterized CAE analysis method of shearer parts is studied. A parameterized CAE analysis system for shearer parts based on UG is developed by using UG (Unigraphics NX) secondary development tool and VS2012 programming software. The system can directly carry out parametric CAE analysis of parts in UG software, can directly call the pre-processing dialog box to set up the pre-processing of finite element analysis, and complete the analysis process by calling the solver directly through the program. The whole process of parameterized CAE analysis of key parts of shearer is realized, which avoids the problem of data loss caused by the conversion of different software in the past, and improves the efficiency of analysis. The effectiveness of the system is verified by an example.
【作者單位】： 太原理工大學機械工程學院;煤礦綜采裝備山西省重點實驗室;
【基金】：山西省煤機重點科技攻關項目(MJ2014-05-02) 山西省自然科學基金項目(201601D011050) 山西省研究生聯合培養基地人才培養項目(2016JD13) 太原理工大學�；痦�(xiàng)目(1205-04020202)
【分類號】：TD421.6;TP391.7

【相似文獻】

相關期刊論文 前3條

1 吳旭;何霄峰;甘蔚鈺;;卷煙包裝設備專用零件參數化CAD系統開發[J];模具技術;2009年04期

2 傅偉;化工設備圖中零件參數化技術[J];揚州職業大學學報;2000年02期

3 ;[J];;年期

相關會議論文 前1條

1 李福海;劉毅;;二次開發UG實現飛機操縱系統零件參數化設計與虛擬裝配自動化[A];全國第十五屆計算機科學與技術應用學術會議論文集[C];2003年

相關碩士學位論文 前1條

1 王玉華;基于WEB方式的機械零件參數化CAD系統的開發[D];大連工業大學;2009年

，

本文編號：2243790