【摘要】：薄煤層開采效率受多種因素影響,以大斗溝煤礦薄煤層開采為基礎,應用計算機模擬技術,將現場調研的停開機時間、采煤機速度及工藝參數作為模擬的基礎數據,再現工作面生產過程,詳細的分析了各影響因素對工作面開采效率的影響,發現了工作面生產系統存在的問題。模擬分析表明:生產設備因素和輔助設備因素是影響大斗溝煤礦82203工作面開采效率的最主要因素,82203工作面在地質條件和開采水平處于國內平均水平時,年產量可以達到58.4萬t。模擬結果為提高薄煤層的開采效率,優化薄煤層工作面的生產環節提供了依據。
[Abstract]:The mining efficiency of thin coal seam is affected by many factors. Based on the mining of thin coal seam in Dadougou coal mine, using computer simulation technology, the time of stopping machine, the speed of shearer and the technological parameters of field investigation are taken as the basic data of simulation. The production process of the working face is reproduced and the influence factors on the mining efficiency of the working face are analyzed in detail. The problems in the production system of the working face are found. The simulation analysis shows that the factors of production equipment and auxiliary equipment are the most important factors affecting the mining efficiency of No. 82203 face in Dadougou Coal Mine. When the geological conditions and mining level are at the domestic average level, the annual output can reach 584000 tons. The simulation results provide the basis for improving the mining efficiency of thin coal seam and optimizing the production link of thin coal seam working face.
【作者單位】： 大同煤礦集團有限責任公司技術中心;
【分類號】：TD823.251

【相似文獻】

相關期刊論文 前5條

1 顏愛全;;利用應力弱面,提高石材礦開采效率和荒料率的實踐[J];新疆有色金屬;2006年02期

2 王泗代;國外提高自行式設備開采效率的途徑[J];有色金屬設計;1999年01期

3 俞有江;;采礦工程提高開采效率的途徑分析[J];科技風;2014年06期

4 張世宏;劉敬琳;韓祥官;;復雜地質條件下經濟型綜采一次采全高技術[J];煤礦安全;2010年06期

5 ;[J];;年期

，

本文編號：2197701