半連續工藝在白音華三號露天煤礦中的應用研究
[Abstract]:Based on the present situation of Baiyinhua No. 3 opencast coal mine and the existing equipment conditions, this paper synthetically applies the related theories, such as mathematical modeling, technical economics, opencast mining theory and semi-continuous process system, etc. The application of semi-continuous process of self-moving crusher in Baiyinhua No.3 opencast coal mine is studied. Baiyinhua No. 3 opencast coal mine stope is in the turning stage. Firstly, the feasibility of semi-continuous arrangement of self-moving crusher in Baiyinhua No. 3 opencast coal mine is studied. Through the calculation and analysis, it is concluded that the efficiency of the semi-continuous process system of the self-moving crusher is greatly reduced and the unit operating cost is high. Therefore, Baiyinhua No.3 opencast coal mine is not suitable for layout and use of semi-continuous process system of self-moving crusher during steering period. In addition, the layout level of semi-continuous process system of self-moving crusher after the completion of stoping turn in Baiyinhua No. 3 opencast coal mine is studied. According to the rock model and the section, the arrangement level of semi-continuous process system of self-moving crusher is 930 level and no step shift is achieved in the later stage. With the development of stope, in the late stage, the western end of open-pit mine develops to the turning point of boundary, so it is necessary to adjust the semi-continuous process system of self-moving crusher, and study the transition scheme of semi-continuous process system of self-moving crusher when the boundary of open-pit mine is turning. Through economic comparison, the transition scheme of adding two belt conveyors at the turning point of boundary is determined. Finally, through statistical analysis of the actual production data of other similar open pit mines, the value of economic indexes is determined, and the economic benefits of semi-continuous process system of self-moving crusher arrangement in Baiyinhua No. 3 opencast coal mine are obtained.
【學位授予單位】:中國礦業大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:TD824
【參考文獻】
相關期刊論文 前10條
1 白潤才;宋群;劉闖;;自移式半連續系統關鍵技術參數的優化[J];金屬礦山;2016年12期
2 梁棟;;白音華露天礦科學開采技術研究[J];內蒙古煤炭經濟;2016年10期
3 李月強;蔡寶加;吳洪陽;;伊敏露天礦采區扇形轉向?qū)ιa(chǎn)的影響[J];露天采礦技術;2016年04期
4 張德順;;白音華煤田三號露天礦區水文地質條件分析[J];企業導報;2016年08期
5 王晨光;白羽;;連續工藝在元寶山露天煤礦的應用[J];露天采礦技術;2016年03期
6 楊文忠;劉煜;陳杏平;;談平朔東露天煤礦全移動破碎站半連續工藝[J];露天采礦技術;2016年01期
7 李榮;曾琦;;MMD破碎機齒板澆鑄仿真及驗證研究[J];鑄造技術;2015年12期
8 張平寬;;黑岱溝露天礦轉向期間散體邊坡安全評價[J];煤炭技術;2015年11期
9 徐寶績;王兆剛;;白音華二號露天煤礦新增設備選型[J];露天采礦技術;2015年08期
10 劉果;蔡光琪;傅新華;;平朔東露天礦轉向扇形開采方案[J];露天采礦技術;2015年07期
相關會議論文 前1條
1 ;內蒙古自治區西烏珠穆沁旗白音華三號露天煤礦[A];中國大型現代化煤礦建設——全國大型煤礦建設現場會暨推進煤炭生產規;F(xiàn)代化發展論壇資料匯編[C];2009年
相關博士學位論文 前4條
1 馬進巖;大型露天煤礦自移式破碎機半連續工藝應用關鍵技術[D];中國礦業大學;2014年
2 孫金龍;大型露天煤礦半連續工藝應用范圍研究[D];中國礦業大學;2013年
3 曹博;復雜條件露天礦采區轉向及運排系統工程優化研究與應用[D];中國礦業大學(北京);2012年
4 陳樹召;大型露天煤礦他移式破碎站半連續工藝系統優化與應用研究[D];中國礦業大學;2011年
相關碩士學位論文 前4條
1 張秀平;白音華二號露天礦西幫邊坡穩定性分析[D];遼寧工程技術大學;2015年
2 哈斯其其格;關于錫林郭勒盟煤田開發利用的理性思考[D];內蒙古師范大學;2011年
3 李榮偉;白音華三號露天煤礦首采區非工作幫邊坡穩定性研究[D];西安科技大學;2008年
4 馬洪偉;霍林河南露天煤礦剝離系統應用半連續工藝的可行性研究[D];遼寧工程技術大學;2004年
,本文編號:2154647
本文鏈接:http://sikaile.net/kejilunwen/kuangye/2154647.html