本文選題：振動篩 + 篩箱�。� 參考：《安徽理工大學》2015年碩士論文

【摘要】：國民經濟快速發展,對環境要求也越來越高,煤炭的潔凈環�；褂靡苍絹�(lái)越受重視。振動篩分設備作為煤炭處理的重要設備被廣泛運用于各級別的選煤廠,在煤炭的深加工、篩分和潔凈化等方面起了重要的作用。 高頻振動篩是選煤廠常用的振動篩,本文以GPS2445型號高頻振動篩為研究對象,對振動篩的參數進行選型和計算,得到了振動篩的運動學和動力學相關參數,并采用Creo Parametric三維軟件對振動篩進行了結構設計,得到振動篩的三維模型。 靜力學分析方面,對振動篩進行力學分析,建立力學模型,分析計算振動篩的載荷類型和載荷大小。根據計算的載荷大小,使用ANSYS Workbench軟件對振動篩受力的關鍵部件進行靜力學分析,分別得到了支撐梁和彈簧支座的應力和變形云圖,靜力學分析結果顯示主要受力部件支撐梁和彈簧支座設計合理,強度可靠。 動力學分析方面,對GPS2445振動篩的篩箱進行了模態分析和諧響應分析。通過模態分析,獲得了振動篩篩箱前10階振型；通過諧響應分析,得到了篩箱在0-150Hz頻率下的應力、變形和加速度響應。同時還分析得到了篩箱在60Hz共振頻率和15.8Hz工頻頻率下的應力和變形情況,結果顯示,振動篩在工頻情況下具有很好的穩定性和安全性。
[Abstract]:With the rapid development of national economy, the environmental requirements are becoming higher and higher, and more attention has been paid to the clean and environmentally friendly use of coal. As an important equipment for coal treatment, vibrating screening equipment is widely used in coal preparation plants at various levels. It plays an important role in the deep processing, screening and cleaning of coal. The high frequency vibrating screen is the commonly used vibrating screen in coal preparation plant. This paper takes GPS2445 high frequency vibrating screen as the research object, the parameters of the vibrating screen are selected and calculated, and the kinematics and dynamics parameters of the vibrating screen are obtained. The structure of the vibrating screen is designed by using Creo Parametric software, and the three-dimensional model of the vibrating screen is obtained. In the aspect of static analysis, the mechanical analysis of vibrating screen is carried out, the mechanical model is established, and the load type and load size of vibrating screen are analyzed and calculated. According to the calculated load size, the stress and deformation cloud diagrams of the supporting beam and spring support are obtained by using ANSYS Workbench software to analyze the key components of the vibration screen. The results of statics analysis show that the supporting beam and spring bearing are reasonable in design and reliable in strength. In the aspect of dynamic analysis, modal analysis and harmonic response analysis of the screen box of GPS2445 vibrating screen are carried out. Through modal analysis, the first 10 vibration modes of the vibrating screen box are obtained, and the stress, deformation and acceleration responses of the screen box at 0-150 Hz frequency are obtained by harmonic response analysis. At the same time, the stress and deformation of the screen box at 60 Hz resonance frequency and 15. 8 Hz power frequency are analyzed. The results show that the vibrating screen has good stability and safety under the power frequency condition.
【學位授予單位】：安徽理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TD452

【參考文獻】

相關期刊論文 前10條

1 劉曉艷,于曉光;大型直線振動篩的動力學分析[J];鞍山科技大學學報;2003年02期

2 羅生梅;張宏林;斯建剛;龍?jiān)?;沖擊鑿巖的瞬態動力學及效率分析[J];蘭州理工大學學報;2009年04期

3 王革新;;雙振動電機同步振動篩設計研究[J];甘肅冶金;2006年04期

4 劉曉春;;振動篩的技術改造及優化設計[J];黃金;2008年03期

5 周齊齊;李戈操;汪謨清;;基于剛?cè)狁詈隙囿w動力學的叉車推出器分析[J];CAD/CAM與制造業信息化;2010年12期

6 張凱;李萬莉;陳熙巍;游張平;;基于D-H算法的六自由度天線控制臂的研究[J];機械設計與制造;2009年12期

7 沈惠平;張會芳;張江濤;何寶祥;楊廷力;;并聯運動振動篩的篩分運動規律及其軌跡的研究[J];機械設計;2008年12期

8 張曄,張美麟,韋繼春;應用虛擬樣機技術對振動篩進行振動分析[J];礦山機械;2003年01期

9 邱連邦;YAH2160型圓振動篩常見問題的分析[J];礦山機械;2005年07期

10 劉玉寶;劉初升;;振動篩篩分過程的虛擬實驗研究[J];礦山機械;2006年04期

，

本文編號：2117802