本文選題：有色金屬冶金 + 含金尾礦��； 參考：《貴金屬》2017年02期

【摘要】：遼寧丹東某銅礦尾礦金品位為1.35 g/t,屬低品位難處理金礦。采用柱浸模擬現場堆浸工藝條件,對工藝參數進行了模擬試驗。條件實驗表明,在浸出劑氰化鈉濃度為0.10%、石灰水噴淋調整浸出液pH=11、礦層高度305 mm、在10℃以上浸出120 h,金浸出率為58.14%。放大試驗延長浸出時間至480 h,金浸出率達到70%左右。獲得的工藝參數可為堆浸生產提供指導。
[Abstract]:The tailing gold grade of a copper mine in Dandong, Liaoning Province, is 1.35 g / t, which is a low grade refractory gold deposit. The process parameters were simulated by column leaching simulation in situ heap leaching process conditions. The experimental results show that the leaching rate of gold is 58.14 when the concentration of sodium cyanide is 0.10, the pH of leaching solution is adjusted by lime water spraying, the height of ore bed is 305 mm, and the leaching time is more than 10 鈩，

本文編號：2003167