發布時間：2018-06-08 13:09

  本文選題：三維地質建模 + 鉆孔數據　； 參考：《科學技術與工程》2017年17期

【摘要】：鉆孔數據是地質中最常見且最簡單的數據,利用鉆孔數據直接建立三維地質模型已經成為國內外學者研究的焦點。在研究前人多種地質建模方法的基礎上,結合工程實踐,提出一套具有工程實用價值的優化地質建模方法。該方法以鉆孔數據為基礎數據,將鉆孔地質剖面數據融入到地質建模中,修正了以往建模中尖滅點位置取值1/2區域的不合理情況,生成精確位置地層尖滅線;并且在建模的過程中加入了依據剖面圖數據的模型調整。最后通過建模實例驗證了該方法的準確性與有效性。
[Abstract]:Borehole data is the most common and simplest data in geology. It has become the focus of scholars at home and abroad to establish 3D geological model directly from borehole data. Based on the research of many geological modeling methods and engineering practice, a set of optimal geological modeling methods with practical engineering value is put forward. This method takes drilling data as the basic data and integrates the borehole geological profile data into the geological modeling. It corrects the unreasonable situation of 1 / 2 region where the point out point position is taken in the previous modeling, and generates the accurate position stratum tip extinguishing line. And the model adjustment based on the profile data is added in the modeling process. Finally, the accuracy and validity of the method are verified by a modeling example.
【作者單位】： 北京大學信息地質研究實驗室;北京大學地球與空間科學學院造山帶與地殼演化教育部重點實驗室;
【分類號】：P628

【相似文獻】

相關期刊論文 前10條

1 李亦綱,曲國勝,陳建強;城市鉆孔數據地下三維地質建模軟件的實現[J];地質通報;2005年05期

2 劉�？�,史輝,李軍;鉆孔數據采編系統在地礦勘查工作中的應用[J];山東地質;2003年02期

3 孫紅梅;賈瑞生;王萍;;基于鉆孔數據的地層三維可視化改進算法[J];測繪科學;2008年03期

4 傅俊鶴;王世紀;廖福源;;城市地質調查基礎工程鉆孔數據查詢應用[J];安徽地質;2009年02期

5 郭艷軍;潘懋;王U，

本文編號：1995897