本文選題：礦燈 + 充電管理��； 參考：《工礦自動化》2017年12期

【摘要】：針對目前礦燈充電監測管理系統存在擴展性不強、通信方式單一、故障點難以定位等問題,設計了一種礦燈智能充電監測管理系統。該系統充電單元實時采集礦燈狀態,控制單元通過RS485總線接收礦燈狀態信息并通過CAN總線發送至CAN轉以太網模塊,然后通過以太網上傳至服務器,監控軟件根據服務器上傳的數據顯示礦燈狀態,同時可下發礦工信息至充電單元。測試結果表明,該系統可準確地采集礦燈狀態,實現對礦燈的實時監控和礦工的信息管理。
[Abstract]:Aiming at the problems of low expansibility, single communication mode and difficulty in locating fault points in the current mine lamp charging monitoring management system, a mine lamp intelligent charging monitoring management system is designed. The charging unit of the system collects the status of mine lamp in real time, and the control unit receives the status information of mine lamp through RS485 bus and sends it to CAN to Ethernet module via CAN bus, then uploads it to the server via Ethernet. The monitoring software can display the status of mine lamp according to the data uploaded by server and send the miner information to the charging unit at the same time. The test results show that the system can accurately collect the status of mine lamp and realize the real-time monitoring of mine lamp and the information management of miners.
【作者單位】： 桂林電子科技大學信息與通信學院;
【基金】：國家自然科學基金資助項目(61362020) 桂林電子科技大學研究生教育創新計劃資助項目(2017YJCX36)
【分類號】：TD621
，

本文編號：1942099