本文選題：剪切擠壓破碎 + 系統模態�。� 參考：《礦業研究與開發》2017年04期

【摘要】：振動慢剪擠壓破碎機是一種超細破碎設備,礦石進入破碎腔內,由鑲嵌襯板內錐的正弦振動和外錐轉動組成剪切、擠壓復合破碎。簡化破碎機系統,著重考慮內錐的運動,利用Lagrange方程建立系統6自由度運動數學模型。基于該運動數學模型在動力學軟件ADAMS中建立破碎機參數化模型,利用ADAMS/vibration與離散元軟件EDEM耦合進行數值模擬。研究了破碎機系統模態特性和外加激振頻率對破碎機破碎力及破碎效果的影響。結果表明,破碎機系統模態為8階時,模態振型對破碎過程最有利;當外加激振頻率為75Hz時,振動慢剪擠壓破碎機的破碎力獲得極大提高,礦石破碎速率提升,礦石粒度更細。
[Abstract]:The vibratory slow shear extruding crusher is a kind of ultra-fine crushing equipment. The ore enters the crushing chamber and consists of the sinusoidal vibration of the inner cone of the inlaid lining plate and the rotation of the outer cone. The system of crusher is simplified and the motion of the inner cone is considered emphatically. The mathematical model of the motion of the system with 6 degrees of freedom is established by using the Lagrange equation. Based on the kinematic mathematical model, the parametric model of crusher is established in the dynamic software ADAMS, and the numerical simulation is carried out by using the coupling of ADAMS/vibration and discrete element software EDEM. The effects of the modal characteristics of the crusher system and the external vibration frequency on the crushing force and the crushing effect of the crusher are studied. The results show that when the mode of the crusher system is 8 order, the modal mode is the most favorable for the crushing process, and when the external exciting frequency is 75Hz, the crushing force of the vibratory slow shear extrusion crusher is greatly improved, the crushing rate of ore is increased, and the ore particle size is finer.
【作者單位】： 江西理工大學機電工程學院;
【基金】：國家自然科學基金項目(51464017) 江西省高校科技落地計劃項目(KJLD13045)
【分類號】：TD451
，

本文編號：1916430