本文選題：管殼式換熱器 + ASPEN�。� 參考：《礦業安全與環�！�2017年04期

【摘要】：利用ASPEN EDR軟件設計管殼式換熱器能省去大量的手工計算過程,提高換熱器設計者的效率。以低濃度瓦斯發電項目余熱利用局部工藝為例,敘述了使用ASPEN EDR軟件設計和校核管殼式換熱器的通用方法。由于熱流介質是具有爆炸危險性的低濃度煤層氣,該換熱器除了滿足換熱、壓降等一般要求外,還必須采取抑阻爆措施來保證換熱器的安全性。
[Abstract]:Using ASPEN EDR software to design shell and tube heat exchanger can save a lot of manual calculation process and improve the efficiency of heat exchanger designer. Taking the local process of waste heat utilization in low concentration gas power generation project as an example, a general method for designing and checking tube and shell heat exchangers using ASPEN EDR software is described. Since the heat flow medium is a low concentration coal bed methane with explosive danger, the heat exchanger must not only meet the general requirements of heat transfer and pressure drop, but also take measures to prevent explosion to ensure the safety of the heat exchanger.
【作者單位】： 煤炭科學研究總院;瓦斯災害監控與應急技術國家重點實驗室;中煤科工集團重慶研究院有限公司瓦斯研究分院;
【分類號】：TD712.67;TK115;TK172
，

本文編號：1845280