本文選題：雙泵并聯　切入點：膏體充填　出處：《河北工程大學》2016年碩士論文

【摘要】：膏體充填可以使煤礦解決現存的“三下”壓煤,并且增強了煤礦的開采率,防止地表塌陷,達到煤礦的綠色生產,改變了以前無法開采和污染環境的現狀,使煤礦形成一個從開采到環境治理新理念的技術發展[1]。雖然膏體管道輸送技術解決了工業固體廢棄物資源化利用的輸送瓶頸,但是膏體屬于固液存在的兩相流,對于充填站制備的料漿在管道輸送過程中壓力損失是難以解決的問題,相關經驗公式也不能直接應用到工程中。本論文提出了一種檢測料漿在管路輸送中壓力損失的方法,通過應變片的形變轉換為電阻的變化,將其運用到膏體充填的實際工程中,同時建立基于雙泵并聯的膏體管道輸送阻力計算模型,并能夠在設計煤礦膏體充填系統時能應用到工程中,其主要內容如下:(1)通過對工業泵的結構、性能特點、工作原理的介紹,并對膏體充填料漿進行了可泵性研究,而且對充填材料的坍落度和泌水率實驗分別從實驗?zāi)康暮蛯?shí)驗步驟進行了理論研究,分析了影響水力坡度的主要因素。(2)建立雙泵并聯的優化模型,采用數值分析方法進行曲線擬合,應用MATLAB等仿真工具求解出約束條件的最優解。基于雙泵并聯的膏體充填對輸送管路的直徑、參數以及布置進行設計和選擇,并且分析料漿在管路輸送的可靠性。(3)建立膏體充填系統的料漿在管道輸送過程中的壓力損失計算模型以及方法,對壓力損失公式進行誤差分析。(4)在滿足煤礦開采充填量要求的情況下,預計算出膏體充填系統的料漿在管道運送過程中的壓力損失,探究影響其壓力損失的關鍵因素,為實際工程中有效降低料漿在管路泵送時的壓力損失提供理論基礎,為今后設計實際充填系統提供重要參考價值。
[Abstract]:Paste filling can make the coal mine solve the existing "three down" coal compaction, and enhance the mining rate of coal mine, prevent the ground from collapsing, reach the green production of the coal mine, and change the present situation which could not be exploited and pollute the environment before.To form a new concept of coal mining from mining to environmental control technology development [1].Although the technology of plaster pipeline transportation solves the bottleneck of the utilization of industrial solid waste, the paste belongs to the two-phase flow of solid and liquid, so it is difficult to solve the pressure loss of slurry prepared by filling station in the course of pipeline transportation.The relevant empirical formula can not be directly applied to engineering.In this paper, a method of detecting the pressure loss of slurry in pipeline transportation is proposed. The strain gauge is transformed into resistance and applied to the practical engineering of paste filling.At the same time, the model of resistance calculation of plaster pipeline based on parallel connection of double pumps is established, and it can be applied to engineering when designing plaster filling system in coal mine. Its main contents are as follows: 1) through the structure and performance characteristics of industrial pump,The working principle is introduced, and the pumpability of paste filling slurry is studied, and the experimental results of slump and bleeding rate of filling material are studied theoretically from the experimental purpose and the experimental steps, respectively.In this paper, the main factors affecting hydraulic gradient are analyzed. The optimization model of double pump parallel connection is established. The curve fitting is carried out by numerical analysis method, and the optimal solution of constraint condition is solved by MATLAB and other simulation tools.The diameter, parameters and arrangement of the pipeline are designed and selected based on the paste filling with parallel double pumps.The reliability of slurry in pipeline transportation is analyzed. The calculation model and method of pressure loss of slurry in plaster filling system are established.The error analysis of the formula of pressure loss. 4) under the condition of meeting the requirement of coal mining filling quantity, the pressure loss of paste filling system in pipeline transportation process is calculated, and the key factors affecting its pressure loss are explored.It provides a theoretical basis for effectively reducing the pressure loss of slurry during pipe pumping in practical engineering, and provides an important reference value for the design of practical filling system in the future.
【學位授予單位】：河北工程大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TD823.7

【參考文獻】

相關期刊論文 前10條

1 劉杰輝;郭進喜;;PLC在煤礦膏體充填控制系統中的應用[J];煤炭工程;2013年09期

2 繆協興;;綜合機械化固體充填采煤技術研究進展[J];煤炭學報;2012年08期

3 張意志;;混凝土可泵性的影響因素及改善措施[J];商品混凝土;2012年07期

4 陸海;尹軍;袁一星;呂謀;;漿體的管道輸送阻力機理及減阻技術[J];青島理工大學學報;2011年05期

5 董偉;;電阻應變片粘貼技巧[J];山西建筑;2011年28期

6 李巧真;李剛;韓欽澤;;電阻應變片的實驗與應用[J];實驗室研究與探索;2011年04期

7 王R，

本文編號：1702150