本文選題：應力分帶特征　切入點：順層鉆孔　出處：《礦業安全與環�！�2017年01期 　論文類型：期刊論文

【摘要】：煤層瓦斯抽采鉆孔合理封孔深度的確定是保證鉆孔嚴密封孔、提高瓦斯抽采效果的關鍵技術。為確定白龍山煤礦一井C2煤層順層鉆孔的合理封孔深度,以煤巷掘進工作面鉆屑瓦斯解吸指標K1值和鉆屑量S值為基礎數據,開展基于應力分帶特征的順層鉆孔合理封孔深度研究并進行現場試驗,結果表明:C2煤層煤巷掘進工作面巷幫0~3 m為卸壓帶,3~7 m為集中應力帶,7 m以深為原始應力帶;C2煤層煤巷掘進工作面順層鉆孔合理封孔深度應在7 m以上;試驗鉆孔瓦斯抽采濃度為9%~45%,平均為27%,瓦斯抽采濃度提高1.8~5.6倍;鉆孔抽采負壓為14~16 k Pa,抽采負壓提高1.7~2.0倍,效果明顯。
[Abstract]:The determination of reasonable sealing depth of coal seam gas drainage borehole is the key technology to ensure the tight sealing hole and to improve the gas drainage effect. In order to determine the reasonable sealing depth of C2 coal seam in Bailongshan coal mine. Based on the data of gas desorption index K1 and cuttings quantity S of coal roadway driving face, the reasonable sealing depth of bedding boreholes based on stress zonation characteristics is studied and field tests are carried out. The results show that the reasonable hole sealing depth should be more than 7 m in the coal roadway driving face of C _ 2 coal seam with 0 ~ 3 m as pressure relief zone and 3 ~ 7 m as concentrated stress zone and 7 m in depth as original stress zone in coal roadway driving face of Wei C2 coal seam. The concentration of gas extraction in the test borehole is 945, the average is 27, the concentration of gas extraction is 1.85.6 times higher, the negative pressure of borehole drainage is 1416kPa, the negative pressure of drainage is 1.720 times, the effect is obvious.
【作者單位】： 中煤科工集團重慶研究院有限公司;國家煤礦安全技術工程研究中心;
【分類號】：TD712.6

【相似文獻】

相關期刊論文 前6條

1 赫英;金鉬鎢錫礦床的某些分帶特征[J];礦產與地質;1989年01期

2 唐玉飛;劉小春;董紅國;;云南劍川建基鐵礦分帶特征[J];云南地質;2013年04期

3 徐述平;楊立強;;山東招平斷裂系統構造-蝕變-礦化水平-分帶特征[J];礦床地質;2010年S1期

4 劉財;楊寶俊;王兆國;劉洋;王典;馮fE;鹿琪;王世煜;;大興安嶺西北部中新生代盆地群基底電性分帶特征研究[J];地球物理學報;2011年02期

5 郭高軒;侯泉林;許亮;劉久榮;辛寶東;;北京潮白河沖洪積扇地下水水化學的分層分帶特征[J];地球?qū)W報;2014年02期

6 ;[J];;年期

相關碩士學位論文 前1條

1 趙京;廣西五圩鉛鋅銻多金屬礦田成礦分帶特征及找礦預測研究[D];廣西大學;2015年

，

本文編號：1638244