發布時間：2018-03-08 10:09

  本文選題：磁鐵礦　切入點：磁選工藝　出處：《西安建筑科技大學》2015年碩士論文　論文類型：學位論文

【摘要】：山東省某鐵礦位于山東省蒼山縣境內,探明地質儲量為7500萬噸,屬于“鞍山式”貧磁鐵礦。選礦比高達4.0以上,若采用常規的選礦方法必會產生高昂的選礦費用,因此,根據鞍山式貧磁鐵礦的特點,結合當?shù)氐木唧w情況,研究適合該礦石特征的選礦工藝流程就具有重要的現實意義。根據工藝礦物學分析結果可知,該礦石中鐵礦物以磁性鐵為主,可選性較好,入磨前可采用干濕式磁選進行預選拋廢,提高入磨品位。磨選系統采用單一磁選;由于有用礦物和脈石礦物顆粒都不均勻,故采用階段磨礦-階段選別流程,提前拋棄大量粗顆粒尾礦,減少進入二段磨選的礦量,以降低選廠能耗、鋼耗等。由條件試驗及全流程試驗的結果可知,-75+12mm干式磁選、-12mm濕式預選可以提前拋棄全部入破量的22%以上,年節約780萬元;采用階段磨礦-階段選別工藝流程一段磨礦細度55%-200目百分含量,經一次磁選可拋棄全部入磨量的43%的合格尾礦,二段磨礦細度為80%-200目百分含量,經二、三次連選可以獲得最終鐵精礦品位為65.20%的合格產品,為該礦周邊十多億噸同類礦石的開發利用探索出了一條可行之路。
[Abstract]:A certain iron ore in Shandong Province is located in Cangshan County, Shandong Province, with proved geological reserves of 75 million tons and belongs to "Anshan type" poor magnetite. The ore dressing ratio is as high as 4. 0. If conventional processing methods are adopted, there will be high mineral processing costs. According to the characteristics of Anshan type poor magnetite and the local specific conditions, it is of great practical significance to study the process flow suitable for the characteristics of the ore. The iron mineral in this ore is mainly magnetic iron, which has good separability. Before grinding, dry and wet magnetic separation can be used to pre-separate and discard the waste and improve the grinding grade. The grinding and separation system adopts a single magnetic separation system, because the useful minerals and gangue mineral particles are not uniform, Therefore, by adopting the process of stage grinding and stage separation, a large number of coarse grain tailings are discarded in advance, and the amount of ore entering the second stage grinding and separation is reduced, so as to reduce the energy consumption of the separation plant. According to the results of conditional test and whole process test, it can be seen that pre-dressing of dry magnetic separation of 75.12 mm and wet type of 12mm can give up more than 22% of the total breaking amount in advance and save 7.8 million yuan per year. The grinding fineness of the first section of the process of stage grinding and stage separation is 55% to 200 mesh content, and the qualified tailings of 43%% of the total amount of grinding can be discarded after the primary magnetic separation, the second stage grinding fineness is 80% -200 mesh content, 2%, The qualified product with final iron concentrate grade of 65.20% can be obtained by three successive separation, which provides a feasible way for the development and utilization of more than 1 billion tons of similar ore around the ore.
【學位授予單位】：西安建筑科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TD951

【參考文獻】

相關期刊論文 前4條

1 趙言勤,段其福;MVS振網篩在本鋼鐵精礦提鐵降硅工藝中的應用[J];金屬礦山;2004年09期

2 章正華;劉秉裕;朱小著;劉陽;;裕豐磁選柱在各大選礦廠的應用[J];現代礦業;2011年05期

3 劉軍;靳淑韻;;中國鐵礦資源的現狀與對策[J];中國礦業;2009年12期

4 朱德慶;羅艷紅;潘建;薛子興;;新疆某菱鐵礦直接還原-磁選試驗研究[J];中國廢鋼鐵;2014年02期

相關會議論文 前1條

1 熊大和;;SLon立環脈動高梯度磁選機大型化研究與應用新進展[A];中國采選技術十年回顧與展望[C];2012年

相關碩士學位論文 前1條

1 羅鳴坤;高磷鮞狀赤鐵礦選礦試驗研究[D];武漢理工大學;2009年

，

本文編號：1583452