本文選題：開采沉陷　切入點：小基線集成技術　出處：《煤炭科學技術》2017年02期 　論文類型：期刊論文

【摘要】：基于礦區開采沉陷具有沉降速度快、量值大的特點,針對使用合成孔徑雷達干涉測量(InSAR)技術難以正確獲取煤炭開采引起的地表下沉的全盆地信息的問題,提出了基于小基線集(SBAS)技術的概率積分法(PIM)獲取礦區沉降量的方法。試驗以陜西某礦52304工作面為例,首先采用SBAS技術得到下沉盆地邊界,然后結合少量SBAS獲取的邊界點和RTK監測點(沉降量≥300mm)反演概率積分法參數及下沉盆地,最后將反演的盆地中心與SBAS獲取的邊界融合,完成了地表沉降的全盆地信息的提取。結果表明:52304工作面走向、傾向最大沉降量相對誤差分別為0.2%、6.0%,該方法可以有效地解決In SAR技術無法監測礦區大梯度沉降問題,為In SAR技術在礦區開采沉陷監測提供了新的用途。
[Abstract]:Based on the characteristics of high subsidence speed and large value of mining subsidence in mining area, it is difficult to obtain the whole basin information of surface subsidence caused by coal mining by using synthetic Aperture Radar Interferometry (InSAR) technology. This paper puts forward a method of obtaining the settlement of mining area by probability integration method based on small base-line collection (SBASS) technique. Taking 52304 face of a mine in Shaanxi province as an example, the boundary of subsidence basin is obtained by using SBAS technique. Then the parameters of probabilistic integration method and subsidence basin are inversed by a few SBAS boundary points and RTK monitoring points (subsidence 鈮，

本文編號：1557607