本文關鍵詞： 參數化 二次開發 工作制動器 無軌膠輪車　出處：《太原理工大學》2015年碩士論文　論文類型：學位論文

【摘要】：隨著煤礦無軌膠輪車品種日益更新,新的無軌膠輪車的出現,勢必會帶來工作制動器重新的研發。由于重新研發工作制動器必須根據無軌膠輪車制動系統的性能參數和結構參數以及它將來的工作狀況,所以工作量非常大。而無軌膠輪車上的工作制動器,除尺寸大小不一樣外,結構形狀和工作原理都一樣。為了解決這個問題,需要設計一款軟件,通過輸入幾個參數就可以在繪圖軟件中生成所有的零件圖和裝配圖。本課題受某企業委托以WC5礦用膠輪車的工作制動器(以下簡稱“工作制動器”)為載體,對工作制動器參數化設計進行研究,最終得到工作制動器參數化設計的軟件。本課題主要研究內容如下：確定工作制動器的制動力矩的計算、摩擦片個數的計算和彈簧設計的計算模型,并對工作制動器的零部件進行歸類。在Access數據庫管理軟件中對工作制動器標準件的數據建立數據庫,采用ADO訪問技術連接數據庫,用SQL查詢語言進行數據的查詢。對工作制動器參數化設計軟件進行界面設計,包括菜單設計和對話框設計。對工作制動器的所有零部件和總圖進行編程,并進行零件圖和總圖的調試,最終完成整個工作制動器參數化設計軟件的研制。本課題對工作制動器進行參數化設計的研究,最終目的是以MicrosoftVisual C++為開發環境、C++為開發語言在CAXA軟件中設計出一套工作制動器參數化繪圖軟件,只要在軟件設計界面上輸入幾個重要的參數,計算機就可以自動進行設計,同時能夠出來一套工作制動器的圖紙。大大提高了工作制動器的設計效率,因此開發這套軟件具有重要意義和應用價值。
[Abstract]:With the increasing variety of coal mine trackless rubber wheel vehicle, the emergence of new trackless rubber wheel vehicle, It will inevitably lead to a new development of the working brake. Since the re-development of the working brake must be based on the performance parameters and structural parameters of the braking system of the trackless rubber wheel vehicle and its future working conditions, So the workload is very heavy. And the brake on the trackless rubber wheel, except for the different sizes, is the same structure and working principle. In order to solve this problem, we need to design a software. All part drawings and assembly drawings can be generated in the drawing software by inputting a few parameters. This subject is commissioned by a certain enterprise to take the working brake (hereinafter referred to as "working brake") of WC5 mine rubber wheel car as the carrier. The parameterized design of working brake is studied, and the software of parameterized design of working brake is obtained. The main contents of this subject are as follows: determining the calculation of braking moment of working brake, In the Access database management software, the database of the standard parts of the working brake is established, and the database is connected by using the ADO access technology. The interface design of parameterized design software of working brake, including menu design and dialog box design, is carried out with SQL query language. All parts and general drawing of working brake are programmed. Finally, the parameterized design software of the whole working brake is developed, and the parametric design of the working brake is studied. The final purpose is to design a parametric drawing software for working brake in CAXA software with MicrosoftVisual C as the development language. As long as several important parameters are input into the software design interface, the computer can design automatically. At the same time, it can produce a set of drawing of the working brake, which greatly improves the design efficiency of the working brake, so the development of the software is of great significance and application value.
【學位授予單位】：太原理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TD525

【參考文獻】

相關期刊論文 前6條

1 王祥瑞;黃國華;;ADO數據庫訪問技術[J];長春大學學報;2010年02期

2 吳義忠,陳立平,周濟;一種基于輪廓裁剪的工程圖裝配方法[J];工程圖學學報;2000年02期

3 沈業全;戴志曄;;W8型懸掛式防爆膠輪車制動系統[J];煤礦機電;2006年06期

4 程玉軍;;防爆膠輪車制動系統沖擊問題的研究[J];煤礦機械;2012年05期

5 王海軍;煤礦井下輕型膠輪車制動器的選型[J];煤礦現代化;2005年04期

6 王青,鄔義杰,夏冠華;三維CAD/CAM系統二次開發技術[J];江蘇機械制造與自動化;2001年04期

，

本文編號：1530039