本文關鍵詞： 參數化設計 二次開發 SolidWorks Visual Basic　出處：《安徽理工大學》2015年碩士論文　論文類型：學位論文

【摘要】：噴漿支護在煤礦井下巷道支護中起著舉足輕重的作用。在一些中小型煤礦,由于井下巷道較小,空間有限,現有噴漿設備難以安裝,噴漿料攪拌及上料工作大多由人工完成。這種作業方式不僅工作效率低,而且還易產生攪拌不均勻現象,影響噴漿支護質量。為實現中小煤礦井下噴漿料攪拌及上料過程的機械化、自動化,結合設計過程中因結構參數多次變化而導致的工作量加大、效率低、設計周期長等問題,利用SolidWorks二次開發技術,對噴漿料上料裝置進行了參數化設計研究。 論文在噴漿料攪拌及上料裝置的參數化設計研究過程中,以SolidWorks軟件為系統開發平臺,Visual Basic為編程語言,并結合Access數據庫完成了整個系統的參數化設計。該系統主要分為三個模塊：輔助設計計算模塊、零件參數化建模模塊和自動裝配模塊。輔助設計計算模塊將整個裝置的設計計算過程進行編程,簡化計算過程；零件參數化建模采用程序驅動和尺寸驅動兩種方法來實現模型的建立及更新；自動裝配則通過程序?qū)Ω鱾�配合零件添加配合約束,使各零件自動進行配合。整個操作過程都在窗口界面進行,通過在界面輸入?yún)?shù),可快速完成參數計算、零件模型更新及裝配等工作。 論文研究開發的噴漿料攪拌及上料裝置的參數化設計系統將計算機輔助設計及參數化設計等先進技術融合在一起,將實現了裝置設計的簡便性和高效性,縮短整個設計周期,提高了工作效率,為類似相關機械產品的設計提供了參考,具有一定的推廣價值。
[Abstract]:The grouting support plays an important role in the underground roadway support. In some small and medium-sized coal mines, due to the small underground roadway and limited space, the existing grouting equipment is difficult to install. Most of the agitation and feeding work are done by hand. This kind of work is not only low efficiency, but also easy to produce uneven mixing phenomenon. In order to realize the mechanization and automation of the mixing and feeding process of grouting materials in small and medium-sized coal mines, combined with the problems of increasing workload, low efficiency and long design period caused by multiple changes of structural parameters in the design process, the quality of grouting support is affected. The parameterized design of slurry feeding device was studied by using SolidWorks secondary development technology. In this paper, SolidWorks software is used as the system development platform and visual Basic is used as programming language in the research process of parametric design of slurry agitation and feeding device. The parameterized design of the whole system is completed with Access database. The system is mainly divided into three modules: aided design and calculation module. Part parameterized modeling module and automatic assembly module. The aided design and calculation module program the whole device design and calculation process to simplify the calculation process; The parameterized modeling of parts adopts two methods: program-driven and dimension-driven to build and update the model, and automatic assembly adds matching constraints to each part through the program. The whole operation process is carried out at the window interface, and the parameter calculation, part model updating and assembly can be completed quickly by inputting parameters at the interface. The parameterized design system of slurry mixing and feeding device is developed in this paper, which combines advanced technologies such as computer-aided design and parameterized design. It will realize the simplicity and efficiency of the device design and shorten the whole design period. It improves the working efficiency and provides a reference for the design of similar mechanical products.
【學位授予單位】：安徽理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TD353;TP311.138

【參考文獻】

相關期刊論文 前10條

1 馬淑梅;杜盛輝;李愛平;李斌;;基于Solidworks的動平衡機零件參數化設計實現技術[J];中國工程機械學報;2011年03期

2 沈海榮,楊勇生,張軍;基于VB技術的SolidWorks二次開發方法[J];計算機輔助工程;2004年04期

3 徐國權;黃志超;;基于SolidWorks的參數化設計二次開發研究[J];機械設計與研究;2007年01期

4 馬詠梅;丁行武;李鑫;;SolidWorks二次開發在機械零件設計中的應用與研究[J];機械傳動;2010年01期

5 靳光法;螺旋葉片展開尺寸的幾種計算方法[J];機械工程師;2003年02期

6 曾祥光;張玲玲;;基于VB的SolidWorks二次開發[J];機械工程師;2006年03期

7 李衛民,劉淑芬;基于Solidworks平臺的二次開發技術[J];機械制造;2003年04期

8 謝中強;;錨噴支護巷道噴漿作業粉塵分布規律的數值模擬[J];煤礦開采;2012年03期

9 康紅普;王金華;林健;;煤礦巷道支護技術的研究與應用[J];煤炭學報;2010年11期

10 袁兆寬;朱澤祥;吳春;張開功;;自動螺旋上料機的研制與應用[J];建井技術;2010年05期

，

本文編號：1518685