本文關鍵詞： 刮板輸送機 軟啟動 動力學 溫度 熱應力　出處：《西安科技大學》2016年碩士論文　論文類型：學位論文

【摘要】：刮板輸送機不僅是煤礦綜采工作面的關鍵設備,而且對于安全生產與提高生產效率具有重要意義。目前,刮板輸送機軟啟動裝置主要包括:液力耦合器、CST軟啟動裝置等。但是,由于上述軟啟動裝置結構復雜,造價較高,一般適用于大中型刮板輸送機。因此,針對中小型刮板輸送機設計了機械式軟啟動裝置。本文主要研究內容如下:根據刮板輸送機軟啟動及其特點分析其負載特性,引入了鋼珠離心式軟啟動裝置;完成了鋼珠離心式軟啟動裝置的總體結構設計,并建立其三維幾何模型,利用Abaqus軟件進行殼體和轉子的強度分析;對鋼珠離心式軟啟動裝置進行了動力學分析,分別考慮了轉速和鋼珠填充量對鋼珠離心式軟啟動裝置傳遞扭矩的影響;推導出了鋼珠離心式軟啟動裝置運行過程中溫度隨時間的變化公式關系,運用COMSOL軟件對鋼珠離心式軟啟動裝置殼體進行溫度與熱應力分析;分析了鋼珠離心式軟啟動裝置殼體溫度與熱應力受轉速,摩擦系數,鋼珠填充量的影響程度,并具體分析了較高的溫度與熱應力對鋼珠離心式軟啟動裝置殼體強度的影響。本研究對刮板輸送機軟啟動的研究與發展具有一定的促進作用。
[Abstract]:Scraper conveyer is not only the key equipment of fully mechanized coal mining face, but also plays an important role in safe production and improving production efficiency. At present, the soft starting device of scraper conveyer mainly includes: hydraulic coupler CST soft starting device, etc. Because of the complex structure and high cost of the soft starting device mentioned above, it is generally suitable for the large and medium-sized scraper conveyors. The main contents of this paper are as follows: according to the soft start of scraper conveyor and its characteristics, the load characteristic is analyzed, and the centrifugal soft start device of steel ball is introduced. The overall structure design of the ball centrifugal soft start device is completed, and its 3D geometry model is established. The strength analysis of the shell and rotor is carried out by using Abaqus software, and the dynamics analysis of the steel ball centrifugal soft start device is carried out. The effects of rotating speed and ball filling on the transfer torque of the ball centrifugal soft start device are considered respectively, and the relationship between temperature and time during the operation of the ball centrifugal soft start device is deduced. The temperature and thermal stress of the shell of the ball centrifugal soft start device are analyzed by using COMSOL software, and the influence degree of the temperature and thermal stress on the shell temperature and thermal stress by rotating speed, friction coefficient and the amount of steel ball filling are analyzed. The influence of high temperature and thermal stress on the strength of shell of centrifugal soft start device of steel bead is analyzed in detail, and this study can promote the research and development of soft start of scraper conveyor to some extent.
【學位授予單位】：西安科技大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TD528.3

【參考文獻】

相關期刊論文 前10條

1 孟國營;程曉涵;;我國礦用刮板輸送機技術現狀及發展分析[J];煤炭工程;2014年10期

2 邵國友;;礦用刮板輸送機主要部件的結構設計[J];煤礦機械;2014年04期

3 劉瑩;宋濤;;基于COMSOL的礦車制動盤瞬態溫度場模擬[J];潤滑與密封;2013年11期

4 楊陽;何強;;基于COMSOL的限矩離合器摩擦片溫度場分析[J];電子設計工程;2013年15期

5 孫永新;;刮板輸送機技術發展現狀[J];煤炭技術;2013年03期

6 何柏巖;孫陽輝;聶銳;李國平;;礦用刮板輸送機圓環鏈傳動系統動力學行為研究[J];機械工程學報;2012年17期

7 高小強;杜福銀;蔡愛國;;變頻驅動刮板輸送機負載特性及調速的智能控制策略研究[J];礦山機械;2011年11期

8 楊健康;郭建廷;;3.3kV供電的刮板輸送機軟啟動技術現狀分析[J];中國煤炭;2011年07期

9 張莉;王宇航;;鋼球式軟啟動安全聯軸器的性能分析[J];礦山機械;2009年18期

10 莊嚴;鄧開陸;王峰;;液力耦合器與電動機聯合運行的特性及影響因素分析[J];煤礦機械;2009年01期

，

本文編號：1494834