發布時間：2019-06-06 10:05

【摘要】：根據金屬固廢資源處理工藝要求,提出預碎機設計的必要性。通過對預碎原理分析、傳動路線設計、動力選擇、關鍵部件耙齒受力分析與布局設計分析,設計預碎機的三維模型總圖,分析了設計注意要點,對預碎機進行了樣機制造與預碎試驗,達到了預期效果。
[Abstract]:According to the requirements of metal solid waste resource treatment process, the necessity of precrusher design is put forward. Through the analysis of pre-crushing principle, transmission route design, power selection, force analysis and layout design analysis of rake teeth of key components, the general diagram of three-dimensional model of precrusher is designed, and the key points of design attention are analyzed. The prototype manufacture and pre-crushing test of the precrusher have been carried out, and the expected results have been achieved.
【作者單位】： 江陰職業技術學院;江蘇華宏科技股份有限公司;
【基金】：江蘇省“青藍工程”優秀青年骨干教師培養基金資助項目(2014(23號)) 江蘇省科技支撐計劃(工業部分)資助項目(BE2013060) 江陰市三項費科技支撐計劃(工業支撐)資助項目(2014(24)) 江陰職業技術學院基金資助項目(15E-JD-25)
【分類號】：X705;TH122
，

本文編號：2494273