在線式鐵譜儀中磨粒的分布研究
[Abstract]:In the process of operation of mechanical equipment, due to the relative motion and contact of the surface of the parts of the friction pair, friction and wear will inevitably occur. The wear failure of the parts is the most common and the most important form of failure in the machinery. The monitoring of oil abrasive particles is an important means to monitor the wear state of mechanical equipment. In view of the shortcomings of the existing on-line monitoring technology of abrasive particles, this paper is based on ferrography analysis technology. The on-line monitoring technology of abrasive particles is studied as follows: (1) A full flow on-line abrasive particle monitoring sensor with comprehensive monitoring information is developed. Based on the ferrography analysis method, a full flow on-line ferrography analysis sensor based on image is developed according to the principle of ferrography analysis, and a suitable experimental platform is built. (2) the deposition distribution of abrasive particles in on-line iron spectrometer is studied, and the deposition distribution of abrasive particles under different conditions is studied by changing the parameters of magnetic field and flow channel. In this process, based on the effect of magnetic field on the deposition distribution of abrasive particles, the magnetic field distribution of annular magnet under different nesting and assembly modes is studied by using annular magnet as the source of magnetic field. (3) the particle size distribution of abrasive particles in on-line iron spectrometer was studied. The grain size of abrasive particles in different sedimentary areas was measured by histogram specification and other image processing methods, and the rectangular distribution maps of abrasive particle sizes in different sedimentary areas were drawn on the basis of the particle size distribution theory of particle groups. The difference of particle size distribution in different sedimentary regions is studied, and the distribution form of abrasive particle size in the whole sedimentary area is given.
【學位授予單位】:南京航空航天大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TH117.1;TH165.3
【參考文獻】
相關期刊論文 前10條
1 嚴宏志,張亦軍;一種磨粒在線監測傳感器的設計及其特性分析[J];傳感技術學報;2002年04期
2 牛云波;陳桂明;;在線磨粒監測傳感技術的研究現狀與發展趨勢[J];傳感器世界;2008年09期
3 張文鋒;余金秋;;柴油機潤滑系統各元件對工作壓力的影響分析[J];柴油機設計與制造;2006年02期
4 左洪福,趙新燦,李力,劉玉平;發動機磨粒統計分布規律與磨損狀態監測研究[J];航空學報;1996年04期
5 陳果,左洪福;潤滑油金屬磨粒的分類參數研究[J];航空學報;2002年03期
6 陳志雄;左洪福;詹志娟;張營;蔡景;;滑油系統全流量在線磨粒靜電監測技術研究[J];航空學報;2012年03期
7 黎瓊煒;新型油液在線監控技術[J];測控技術;2005年04期
8 殷勇輝,嚴新平,蕭漢梁;電感式磨粒監測傳感器的磁場均勻性研究[J];摩擦學學報;2001年03期
9 呂曉軍,景敏卿,伍昕,謝友柏;基于圖像傳感器的在線鐵譜儀的實驗研究[J];摩擦學學報;2002年03期
10 左洪福,劉玉平,李力,吳明贊;發動機磨屑尺寸的分布模型及其應用[J];南京航空航天大學學報;1995年06期
相關博士學位論文 前3條
1 李紹成;基于靜電感應和顯微圖像的油液磨粒監測技術研究[D];南京航空航天大學;2009年
2 張艷彬;機器油液微流控檢測技術研究[D];南京航空航天大學;2007年
3 汪選國;銷盤滑動磨損試驗的仿真方法研究[D];武漢理工大學;2009年
相關碩士學位論文 前2條
1 霍富功;基于形態學的序列圖像目標檢測[D];中北大學;2011年
2 劉宏娟;矩形永磁體三維磁場空間分布研究[D];北京工業大學;2006年
本文編號:2488572
本文鏈接:http://sikaile.net/kejilunwen/jixiegongcheng/2488572.html