纜索起重機靜動態特性研究
[Abstract]:Cable crane is a kind of lifting equipment which can be used for both horizontal and vertical transportation. It is often used in places where the terrain is undulating, or where other transport machinery is not technically and economically appropriate on land. Can be long-distance air transportation, not restricted by the ground and construction operation site. Therefore, it is widely used in highway, railway bridge construction and water conservancy construction, used to transport building materials and hoisting reinforced concrete prefabricated components. Based on the research background of 60kN cable crane of oblique card power station, the main components of cable crane, such as main cable, tower frame, trolley and so on, the basic theories of finite element method, structural mechanics, dynamics and so on, are studied in this paper. The three-dimensional mechanical design software SOLIDWORKS is used to establish the geometric model of tower, the main cable and tower are calculated and analyzed by MATLAB software and ANSYS software, and the lifting weight-trolley system is studied by using SIMULINK toolbox. Finally, the characteristics of each part of the whole machine are studied. For the main cable of the cable crane, the paper studies the envelope of the cable crane in different working conditions, whether to consider the sag, the influence of concentrated load on the vibration characteristics, to obtain its vibration frequency and vibration mode; For the tower, the stress distribution law and the high stress zone are determined by calculation. The natural frequency and the corresponding mode shape of the tower are studied, and the dynamic response of the displacement and stress of the key parts of the tower when the load changes are also studied. At the end of the paper, the mechanical model is deduced and the response result is obtained by using the lifting weight and the trolley as the system. In this paper, the static and dynamic characteristics of the main components of the fixed cable crane are studied through the analysis and calculation of the 60kN cable crane of the inclined card power station, which has certain reference significance for the design and application of this kind of cable crane.
【學位授予單位】:西南交通大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TH218
【參考文獻】
相關期刊論文 前10條
1 伏迎喜;;新建準朔鐵路黃河特大橋LQ2800kN型纜索起重機的設計與施工[J];安徽建筑;2011年02期
2 王柏德,黃萬吉;架空索道纜索張力的動態分析[J];東北工學院學報;1993年04期
3 陳自力;鄧瑞基;;集中荷載作用下懸索的主共振分析[J];動力學與控制學報;2007年04期
4 周勇,李勇智,黃曉兵;利用SIMULINK對集裝箱起重機防搖進行建模與仿真[J];港口裝卸;2003年01期
5 張運波,沈銳利;單索結構振動特性的有限元分析[J];公路;2002年10期
6 張運波,高偉,劉志勇;影響單索結構振動特性的參數分析[J];公路交通科技;2004年12期
7 鄭憲政,郝超;用振動法估算拉索張力的實用公式[J];國外橋梁;1997年03期
8 王宏,郭彥林,任革學;索振動控制及其工程應用[J];工業建筑;2003年07期
9 龔國芳;架空索道鋼絲繩振動分析[J];淮南礦業學院學報;1994年02期
10 曹資,薛素鐸,劉景園;懸索結構動力分析理論及參數研究[J];建筑結構;1996年01期
相關博士學位論文 前1條
1 周?;斜拉索振動控制理論與試驗研究[D];同濟大學;2005年
相關碩士學位論文 前10條
1 劉萬鋒;粘性剪切型阻尼器在斜拉橋拉索減振中的研究[D];長安大學;1999年
2 余群;纜索起重機的仿真與優化設計研究[D];武漢理工大學;2002年
3 陳剛;振動法測索力與實用公式[D];福州大學;2004年
4 楊相展;大跨度斜拉鋼管混凝土拱橋動力學及拉索振動研究[D];湖南大學;2006年
5 李屏;纜索起重機的關鍵技術研究[D];西南交通大學;2006年
6 周超舟;大噸位重力纜索吊裝系統設計研究[D];同濟大學;2006年
7 董學武;超大跨徑斜拉橋斜拉索振動特性及減振措施研究[D];同濟大學;2007年
8 曹天義;利用磁流變阻尼器的斜拉索振動的半主動控制研究[D];哈爾濱工業大學;2006年
9 王曉琴;磁流變阻尼器對斜拉索振動控制的理論與試驗研究[D];武漢理工大學;2007年
10 王蓓;斜拉橋拉索振動及減振裝置研究[D];西安理工大學;2008年
,本文編號:2465223
本文鏈接:http://sikaile.net/kejilunwen/jixiegongcheng/2465223.html