【摘要】：復雜機電產品的設計是為滿足人類對機電產品性能的需要為目的的,運用相關基礎知識、專業知識、實踐經驗和系統工程等方法,進行設想和構思,計算和分析,提供機械裝備設計和制造依據的結果的全過程工作。因此,復雜機電產品的設計問題是一個多過程、多源、多部件、多學科的耦合過程。 本文將價值工程理論引入復雜機電產品設計,并在復雜機電產品的設計過程中運用質量功能展開技術,質量功能展開擅長將顧客需求轉化信息轉化為設計需求,因此,在以價值工程理論為基礎的產品設計中應用質量功能展開,能夠有效的開展需求與功能分析,保證新產品開發的成功。 首先,構建了復雜機電產品設計的價值工程理論框架,確定復雜機電產品設計的價值工程作業實施程序,為設計開展新的設計理念、方法和技術的優化研究奠定基礎。 其次,在價值工程理論指導下,復雜機電產品設計的信息收集并對復雜機電產品進行功能分析與功能評價。 再次,以價值工程活動對象為基礎,以復雜機電產品的功能為導向,在顧客需求分析時運用質量功能展開中的質量屋技術,以獲得準確的顧客需求信息,在充分可靠地滿足顧客需求的前提下,對功能和成本進行系統的綜合分析,努力尋求用低成本的功能實現手段替代原有的功能實現手段。 最后,制定復雜機電產品設計的優化方案。用最低的全壽命周期成本取得必要功能作為多方案的詳細評價的依據,并最終提出最優方案的生成策略。
[Abstract]:The design of complex mechanical and electrical products is designed to meet the needs of human being for the performance of mechanical and electrical products. By using relevant basic knowledge, professional knowledge, practical experience and system engineering, the design of complex mechanical and electrical products is envisaged and conceived, calculated and analyzed. The entire process of providing the results of the design and manufacture of mechanical equipment. Therefore, the design of complex electromechanical products is a multi-process, multi-source, multi-component, multidisciplinary coupling process. In this paper, the theory of value engineering is introduced into the design of complex mechanical and electrical products, and the quality function deployment technology is used in the design process of complex mechanical and electrical products. The quality function deployment is good at transforming customer demand into design requirements. The application of quality function in product design based on value engineering theory can effectively carry out demand and function analysis and ensure the success of new product development. Firstly, the value engineering theory framework of complex electromechanical product design is constructed, and the value engineering implementation program of complex electromechanical product design is determined, which lays a foundation for the research of new design idea, method and technology optimization. Secondly, under the guidance of value engineering theory, the information of complex electromechanical product design is collected, and the function analysis and function evaluation of complex electromechanical product are carried out. Thirdly, based on the object of value engineering, and guided by the function of complex mechanical and electrical products, the quality room technology is used in the analysis of customer demand, so as to obtain accurate customer demand information. On the premise of fully and reliably meeting the customer's demand, this paper makes a comprehensive analysis of the function and cost, and tries to replace the original function realization method with the low cost function realization method. Finally, the optimization scheme of complex electromechanical product design is established. The minimum life cycle cost is used as the basis for the detailed evaluation of multiple schemes, and an optimal scheme generation strategy is proposed.
【學位授予單位】：沈陽工業大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH122

【參考文獻】

相關期刊論文 前10條

1 代宏坤;基于價值的管理與價值管理的比較分析[J];商業研究;2005年08期

2 李西文 ,齊潤婷;價值管理的發展[J];合作經濟與科技;2005年19期

3 韓榮;(五)價值工程概述[J];經濟理論與經濟管理;1981年05期

4 呂夢江;;對如何確定最合適區域方程參數的探討——價值工程方法研究[J];技術經濟;1985年05期

5 余立功;;介紹價值工程中最適區域曲線的一種簡易求法[J];技術經濟;1985年06期

6 劉貴文,沈岐平;美國、英國及澳州VE/VM標準的比較分析[J];價值工程;2002年03期

7 周雙海,孫繼德;大跨度梁板設計中價值工程應用案例分析[J];價值工程;2003年01期

8 張文泉,李濤,蘇建軍;價值工程發展方向——價值管理[J];價值工程;2004年09期

9 張國軍;價值工程在建筑工程施工技術與質量管理應用中的作用[J];價值工程;2005年01期

10 陳潔;;關于價值工程的價值分析[J];價值工程;2006年01期

相關重要報紙文章 前2條

1 張楠;[N];中國財經報;2007年

2 中國建筑材料工業規劃研究院 劉建一;[N];光明日?qǐng)?bào);2007年

，

本文編號：2411777