【摘要】：在各類CAD系統中依據國家標準實現產品制造信息（Product ManufacturingInformation，PMI）可視化是制造企業信息化的一個重要部分。常規的“各個擊破”的開發方式不僅規范性欠佳，而且在企業信息化進入三維階段以后其造成的資源浪費和重復性勞動問題已經越發凸顯。 本文針對產品制造信息的可視化和重用技術進行了研究。分析了產品制造信息的數據結構，，設計了與CAD系統無關的產品制造信息可重用數據結構。結合對產品制造信息可視化功能的需求分析，提出了可重用產品制造信息可視化體系架構。可重用產品制造信息可視化體系架構由可重用組件、異構CAD系統對組件的重用實現和可視化流程設計三部分組成。 針對三維產品制造信息可視化的特殊需求，分析了三維建模技術的發展趨勢和輕量化模型，制定了三維產品制造信息與三維實體模型相分離的信息永久儲存和再現技術。結合國際和國家相關產品數字化定義標準，制定了產品制造信息標注面定義原則和以標注面為基礎的產品制造信息管理方法。 詳細分析了表面粗糙度信息的重用數據結構，并利用VC++開發了表面粗糙度可重用定義組件。以產品制造信息重用體系架構為基礎，實現了粗糙度信息利用重用定義組件在異構CAD系統中的架構部署。分析了表面粗糙度二維和三維可視化的流程，利用可重用定義組件分別在AutoCAD和TYCAD中實現了表面粗糙度的二維可視化標注，在InteVUE中實現了表面粗糙度的三維可視化標注和管理。
[Abstract]:The visualization of product manufacturing information (Product ManufacturingInformation,PMI) based on national standards is an important part of manufacturing enterprise informatization in all kinds of CAD systems. The conventional way of "breaking through" is not only standard, but also the problem of waste of resources and repetitive labor has become more and more prominent after the enterprise information has entered the three dimensional stage. In this paper, the visualization and reuse technology of product manufacturing information is studied. The data structure of product manufacturing information is analyzed, and the reusable data structure of product manufacturing information independent of CAD system is designed. Based on the requirement analysis of product manufacturing information visualization, a reusable product manufacturing information visualization architecture is proposed. The architecture of manufacturing information visualization for reusable products consists of reusable components, reuse of components in heterogeneous CAD systems and visual process design. According to the special requirement of 3D product manufacturing information visualization, the development trend and lightweight model of 3D modeling technology are analyzed, and the permanent storage and reproducing technology of 3D product manufacturing information separated from 3D solid model is developed. Based on the international and national standards of digital product definition, the definition principle of product manufacturing information label surface and the method of product manufacturing information management based on label surface are established. The reuse data structure of surface roughness information is analyzed in detail, and the reusable definition component of surface roughness is developed by using VC. Based on the architecture of product manufacturing information reuse system, the architecture deployment of roughness information reuse definition component in heterogeneous CAD system is realized. The flow of two-dimensional and three-dimensional visualization of surface roughness is analyzed, and the two-dimensional visualization of surface roughness is realized in AutoCAD and TYCAD using reusable definition components, and the 3D visualization and management of surface roughness are realized in InteVUE.
【學位授予單位】：華中科技大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH164;TP391.72

【參考文獻】

相關期刊論文 前10條

1 舒啟林,王成恩;產品全生命周期中的制造信息模型[J];東北大學學報;2005年08期

2 陳琳,秦學英,王青;復雜三維模型的遮擋檢測加速算法[J];工程圖學學報;2005年02期

3 廖雪梅;;機械設計從三維開始將是必然趨勢[J];裝備制造技術;2009年06期

4 范玉青;機械產品數字化定義的數據內容及其組織[J];航空制造技術;2002年03期

5 王俊彪;劉闖;;飛機零件制造模型及數字化定義[J];航空制造技術;2011年12期

6 何小朝,沈梅,張鐵昌;并行CAD/CAM集成中的產品模型表示方法研究[J];航空學報;2000年01期

7 陳建國;張玲;;CAD三維建模技術的發展[J];機電技術;2010年04期

8 陳曉波;陳小蘭;;基于AutoCAD二次開發實現表面粗糙度的智能標注[J];機電信息;2011年27期

9 吳敏;黃峻森;;3D應用程序開發的強大動力——可視化組件HOOPS[J];CAD/CAM與制造業信息化;2006年07期

10 呂俊林;江平宇;;智能三維CAPP的發展方向及核心技術[J];CAD/CAM與制造業信息化;2009年11期

相關會議論文 前1條

1 許昊;;基于三維設計的快速產品開發[A];2009年促進中部崛起專家論壇暨第五屆湖北科技論壇——裝備制造產業發展論壇論文集（上）[C];2009年

本文編號：2380078