【摘要】：本文研究的主要內容是對電液伺服控制系統中的關鍵元件一電液伺服閥進行特性測試。 在本文中,我們在133廠原有的液壓試驗臺液壓回路的基礎上,重點對伺服閥的靜態特性進行了分析,確定了測試方法,結合虛擬儀器與CAT技術,研制出一套基于虛擬儀器的伺服閥靜態特性自動化測試系統,取代了原有的手工測試系統,使新試驗臺具有操作簡單,體積小,集成度高,通用性等特點。 在本測試系統中,測試的主要項目包括有伺服閥的壓力、空載流量、內泄漏及分辨率等靜態特性測試。在試驗臺改造過程中,涉及的研究內容主要有虛擬儀器的設計、數據采集、數據分析處理、信號控制、液壓伺服控制、硬件搭配、機械加工等,其中針對整個測試系統測試精度的基礎—壓控電流源進行了重點研究。 在測試系統中,系統軟件采用Windows XP操作系統,應用軟件采用虛擬儀器編程軟件LabVIEW2009。用虛擬儀器結合數據采集卡實現了信號輸出,數據采集顯示等功能,取代了信號發生器、以及一些儀器儀表,降低了成本,縮短了開發時間。
[Abstract]:The main content of this paper is to test the characteristics of electro-hydraulic servo valve, which is the key component of electro-hydraulic servo control system. In this paper, on the basis of the hydraulic circuit of the original hydraulic test-bed in 133 factory, the static characteristics of the servo valve are analyzed, the test method is determined, and the virtual instrument and CAT technology are combined. An automatic testing system of servo valve static characteristics based on virtual instrument is developed, which replaces the original manual test system and makes the new test-bed have the characteristics of simple operation, small volume, high integration and versatility. In this test system, the main test items include servo valve pressure, air flow, internal leakage, resolution and other static characteristics test. In the course of the test rig transformation, the research contents involved mainly include the design of virtual instrument, data acquisition, data analysis and processing, signal control, hydraulic servo control, hardware collocation, machining, etc. The voltage control current source, which is the basis of the testing accuracy of the whole test system, is studied emphatically. In the test system, the system software uses Windows XP operating system, and the application software uses virtual instrument programming software LabVIEW2009.. The functions of signal output, data acquisition and display are realized by using virtual instrument combined with data acquisition card, which replaces the signal generator and some instruments, reduces the cost and shortens the development time.
【學位授予單位】：長春理工大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH137.52

【引證文獻】

相關碩士學位論文 前1條

1 周鑫;產品多目標多類型選配技術及其應用研究[D];浙江大學;2013年

，

本文編號：2365002