淺析壓力容器檢測誤差的影響因素
[Abstract]:The safety requirements of pressure vessels are high, and the manufacturing quality of pressure vessels must be guaranteed. However, the manufacturing process of pressure vessel is more complex and the detection is difficult. Therefore, in order to reduce the detection error and improve the detection accuracy, it is necessary to fully understand the factors that affect the detection error of the pressure vessel. Therefore, through a lot of research and investigation, on the basis of expounding the necessity of pressure vessel detection, this paper analyzes the causes of the detection error from the inspection tools, the test standard, the test datum and the method. At the same time, some suggestions are put forward to improve the detection accuracy, which can help the smooth production and use of pressure vessels.
【作者單位】: 江蘇省特種設備安全監督檢驗研究院南通分院;
【分類號】:TH49
【相似文獻】
相關期刊論文 前10條
1 曾孟雄;精密平板檢測誤差分布及影響因素[J];武漢水利電力大學(宜昌)學報;1998年01期
2 高連柱;李成志;韓森;;激光描掃檢測系統中陀螺效應對檢測誤差的影響[J];長春光學精密機械學院學報;1986年04期
3 蘇相波;;檢測儀表的分類及檢測誤差[J];商品與質量;2012年S8期
4 唐兆巖;檢測中的誤差及產生的原因[J];質量天地;2003年02期
5 劉軍;;高精度傳動齒輪檢測誤差分析及檢測方法的改進[J];計測技術;2007年S1期
6 彭?yè)P(yáng)林;戴一帆;陳善勇;王建敏;鄭子文;;大口徑空間反射鏡高精度面形檢測的支撐技術研究[J];應用光學;2011年06期
7 陳杰;馬存寶;宋東;;檢測誤差條件下的系統可靠性與性能估計[J];西北工業大學學報;2014年02期
8 吳小邦;;相對檢測方法的分析和應用[J];制造技術與機床;2009年06期
9 孟慶操;趙曉哲;朱紅波;;艦炮零位檢測方法與實現[J];火力與指揮控制;2009年11期
10 劉勇;靳璞;;工程結構應力檢測誤差的減小和消除[J];市政技術;2010年05期
相關重要報紙文章 前1條
1 林立恒;電爐一級除塵系統的水溫控制③[N];世界金屬導報;2003年
相關碩士學位論文 前1條
1 李騰;飲用水源中痕量二級胺檢測方法及其應用的研究[D];中南林業科技大學;2012年
,本文編號:2352393
本文鏈接:http://sikaile.net/kejilunwen/jixiegongcheng/2352393.html