【摘要】：隨著我國電力工業的飛速發展,國家對輸電線路的施工中的物資運輸也越來越重視,索道運輸作為在輸電線路中一種新的運輸方式,憑借了自身成本低、施工方便并且不受氣候影響等諸多優點,已經在輸電線路施工中廣泛應用。國內貨運索道大多數采用基于螺栓的固定式抱索器,因此確定螺栓預緊力對保證貨運索道成功運行并且降低危險系數是至關重要的。針對現在常用的小車抱索器進行分析計算和現場實驗,成功解決了螺栓預緊力的確定以及螺栓的選取問題,對貨運索道技術的發展具有實際的推動作用。
[Abstract]:With the rapid development of electric power industry in our country, more and more attention has been paid to the material transportation in the construction of transmission lines. As a new mode of transportation in transmission lines, ropeway transportation has low cost. It has been widely used in transmission line construction because of its advantages such as convenient construction and not affected by climate. Most of the domestic freight ropeway use bolted fixed cable holder, so it is very important to determine the bolt preload force to ensure the successful operation of the freight ropeway and reduce the risk factor. According to the analysis and calculation of the cable holder and the field experiment, the determination of the bolt preload force and the selection of the bolt are solved successfully, which can promote the development of the freight ropeway technology.
【作者單位】： 西南交通大學機械工程學院;四川電力送變電建設公司;
【分類號】：TM752;TH131.3

【相似文獻】

相關期刊論文 前10條

1 徐奇煥;汽缸螺栓咬死的分析與防止[J];華東電力;1989年06期

2 徐茂凱;;復合材料螺栓發展概況[J];纖維復合材料;2012年03期

3 李雪s，

本文編號：2318149