【摘要】：氣動技術是實現自動化和機械化的有效手段之一,具有高速高效、潔凈安全、低成本及易維護等優點,其在工業領域中的應用正日益廣泛。不難預料,隨著科技的發展,氣動技術將得到更大的發展空間,并將在工業自動化方面得到更廣泛的應用。 本文首先介紹了氣壓電磁閥的發展概況以及可靠性技術研究現狀。接著詳細介紹了氣壓電磁閥的一般設計方法,分別從磁隙分析、結構形式以及電磁系統設計等方面加以闡述。在介紹了可靠性設計概論后,結合自己從事的科研工作,對三通氣壓電磁閥的可靠性性能做了深入分析。在缺乏廣泛理論研究的基礎上,結合產品的實際使用情況及試驗調試過程中出現的故障,作者總結并給出了三通氣壓電磁閥故障樹模型。在改進設計中,注重失效模式與產品性能的關聯影響,綜合分析產品的各項性能指標,提出了三通氣壓電磁閥的可靠性設計方法,克服了以往設計中存在的此消彼長的弊端。不僅如此,在注重改進設計的同時,加強了對產品研制工藝環節的可靠性工作研究,通過對設計環節和加工制造環節的全過程可靠性工作,產品的可靠性得到了較大提高。改進設計后的產品,經試驗驗證,綜合性能指標有了較大幅度地提高,可靠性也有了顯著增長,特別是其工作壽命得到了翻倍的提高。盡管研究工作有一定的局限性,但對類似氣壓電磁閥的研制設計仍有一定的借鑒意義。
[Abstract]:Pneumatic technology is one of the effective means to realize automation and mechanization. It has the advantages of high speed, high efficiency, clean and safe, low cost and easy maintenance. It is not difficult to predict that with the development of science and technology, pneumatic technology will get more development space, and will be more widely used in industrial automation. This paper first introduces the development of pneumatic solenoid valve and the research status of reliability technology. Then the general design method of pneumatic solenoid valve is introduced in detail, including magnetic gap analysis, structure form and electromagnetic system design. After introducing the introduction of reliability design, the reliability performance of three-way pneumatic solenoid valve is deeply analyzed in combination with its own scientific research work. On the basis of the lack of extensive theoretical research, combined with the actual use of the product and the faults in the process of test and debugging, the fault tree model of the three-way pneumatic solenoid valve is summarized and given. In the process of improving design, the relationship between failure mode and product performance is paid attention to, and the reliability design method of three-way pneumatic solenoid valve is put forward by synthetically analyzing the various performance indexes of the product, which overcomes the drawback that existed in the previous design. Not only that, but also the research on the reliability of the process of product development has been strengthened, and the reliability of the product has been greatly improved through the reliability work of the whole process of the design link and the manufacturing link. The experimental results show that the comprehensive performance index has been greatly improved, and the reliability has increased significantly, especially its working life has been doubled. Although the research work has some limitations, it still has some reference significance for the development and design of similar pneumatic solenoid valve.
【學位授予單位】：上海交通大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH134

【引證文獻】

相關碩士學位論文 前1條

1 董海波;安溢活門運動特性及膜片疲勞分析[D];大連理工大學;2012年

，

本文編號：2313497