本文選題：幾何過程 + 預防維修策略��； 參考：《西南交通大學》2012年碩士論文

【摘要】：本文主要研究基于幾何過程的兩種失效狀態系統的預防維修策略。 首先,本文在文獻[40]基礎上增加預防性維修,并假定系統預防維修時間間隔為一定值,系統失效方式按可修復失效和不可修復失效。可修復失效可以進行失效修復,而不可修復失效使系統報廢只能進行替換。在此基礎上,求解平均費用率C(N)的表達式和最優維修策略N’,并通過實際數據驗證維修策略的實用性。 其次,考慮讓系統預防維修的時間間隔成為一個變化的值。在系統運行的過程當中,當可靠度降至R時,系統就進行預防維修。建立關于可修復失效次數N的預防維修策略,給出平均費用率的表達式。并給出一算例,得到最優預防維修策略N‘及相應的平均費用率。 最后,在相同的條件下,與文獻[40]的模型進行比較,得出預防性維修策略更為合適。
[Abstract]:In this paper, the preventive maintenance strategies of two failure state systems based on geometric processes are studied. Firstly, preventive maintenance is added on the basis of reference [40], and the system preventive maintenance interval is assumed to be a certain value, and the failure mode of the system is repairable and irrepairable. Repairable failures can be repaired, but irreparable failures can only be replaced by system scrapping. On this basis, the expression of average cost rate C (N) and the optimal maintenance strategy N are solved, and the practicability of the maintenance strategy is verified by actual data. Second, consider making the system preventive maintenance interval a variable value. During the operation of the system, the system carries out preventive maintenance when the reliability drops to R. The preventive maintenance strategy for the number of repairable failures N is established and the expression of the average cost rate is given. An example is given to obtain the optimal preventive maintenance strategy N 'and the corresponding average cost rate. Finally, under the same conditions and compared with the model in reference [40], it is concluded that preventive maintenance strategy is more suitable.
【學位授予單位】：西南交通大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH17

【參考文獻】

相關期刊論文 前2條

1 譚林;陳童;郭波;;基于幾何過程的單部件可修系統最優維修策略[J];系統工程;2008年06期

2 唐亞勇;劉亞平;;具有兩種失效狀態系統的幾何過程維修模型[J];四川大學學報(自然科學版);2006年06期

，

本文編號：2105951