本文選題：葫蘆式起重機 + 單梁橋架�。� 參考：《太原科技大學》2012年碩士論文

【摘要】：葫蘆式起重機是除橋式起重機外又一類在工業生產中起著重要作用的起重機運輸機械。近年來隨著CAD技術、參數化和模塊化設計方法在起重機行業的不斷應用，從根本上改變了傳統的設計模式，縮短了產品的生產周期，大大提高了產品的設計效率；尤其是優化設計方法的應用，使得產品的質量和經濟性有了很大提高，在市場中更具有競爭力。 目前針對橋式起重機的設計已經有很多完整CAD設計系統，這些起重機設計系統要么是以AutoCAD為平臺的二維CAD系統，要么基SolidWorks的三維CAD系統，也有一些帶有優化設計功能的設計系統，但在應用范圍甚廣的葫蘆式起重機領域卻很少。 本文以單梁橋架結構的葫蘆式起重機為研究對象，在分析研究現有的起重機設計系統的基礎上研究開發了一套具有優化設計等功能的綜合設計系統。這套系統以VC++6.0軟件為開發平臺，通過軟件集成技術將AutoCAD、SolidWorks和MATLAB軟件集成到一起，，實現了結構設計計算、截面尺寸優化、零部件及橋架的三維模型、二維工程圖形及設計說明書的自動生成，使產品的設計滿足成本低、周期短、系列化等要求，同時也對起重機綜合設計系統的進一步研究具有重大的意義。另外，本文還提出了參數化設計過程中遇到圖形和表格時的處理方法，介紹了曲線擬合在圖形和表格處理時的具體應用。
[Abstract]:Hoist crane is a kind of crane transportation machinery which plays an important role in industrial production besides bridge crane. In recent years, with the continuous application of CAD technology, parameterized and modular design methods in crane industry, the traditional design mode has been fundamentally changed, the production cycle of products has been shortened, and the design efficiency of products has been greatly improved. Especially the application of optimization design method makes the quality and economy of the product greatly improved and more competitive in the market. At present, there are many complete CAD design systems for bridge cranes. These crane design systems are either 2D CAD systems based on AutoCAD or 3D CAD systems based on SolidWorks. There are also some design systems with optimal design function, but they are rarely used in the field of hoist crane. Based on the analysis and research of the existing crane design system, a comprehensive design system with the function of optimization design is developed in this paper, taking the hoist crane with single beam bridge frame structure as the research object, and based on the analysis and research of the existing crane design system. The system is developed on the platform of VC 6.0, and the software of AutoCAD SolidWorks and MATLAB is integrated through the technology of software integration, which realizes the structural design and calculation, the optimization of section size, the 3D model of components and bridge frame. The automatic generation of 2D engineering graphics and design instructions makes the design of the product meet the requirements of low cost, short period and serialization. It is also of great significance to the further study of the comprehensive design system of cranes. In addition, this paper also puts forward the processing method of graph and table in parameterized design process, and introduces the concrete application of curve fitting in graph and table processing.
【學位授予單位】：太原科技大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH211.3;TP391.72

【參考文獻】

相關期刊論文 前10條

1 徐格寧;朱映東;;基于SolidWorks二次開發的變量化三維建模方法[J];中國工程機械學報;2009年01期

2 鄧學雄,梁柯;現代CAD技術的發展特征[J];工程圖學學報;2001年03期

3 張棟梁;劉飛;;注塑模具設計中的參數化[J];桂林航天工業高等�？茖W(xué)校學報;2009年03期

4 李e

本文編號：2100720