發布時間：2018-07-03 17:23

  本文選題：Inventor + API��； 參考：《華東理工大學》2011年碩士論文

【摘要】：對三維CAD軟件進行的二次開發,為企業提供了專業化的產品軟件,在更高層面上推廣和應用設計軟件,另一方面也提高了企業對產品的設計效率。軸類零件特征相似,在各個領域應用廣泛。本文利用Autodesk公司開發的三維軟件Inventor,并以其VBA程序接口開發了軸類零件輔助設計系統。系統融入了設計者的設計理念和意圖,大大節約了設計的時間,降低了設計成本,從而提高企業的競爭力。系統對軸類零件的特征進行分析,創建了參數化快速建模方法,并對建模結果進行材料設定,渲染設定,最后創建計算分析模塊對設計結果進行結構分析,從而優化設計結果。最后結合實際情況,利用所開發軟件創建了一根典型軸,并對結果進行屬性設置和計算分析,證明了軟件的優越性和實用性。
[Abstract]:The secondary development of 3D CAD software provides the specialized product software for the enterprise, popularizes and applies the design software in the higher level, on the other hand, also improves the enterprise's design efficiency to the product. Shaft parts have similar features and are widely used in various fields. In this paper, an assistant design system for shaft parts is developed by using the 3D software Inventordeveloped by Autodesk Company and its program interface. The system integrates the designer's design idea and intention, greatly saves the design time, reduces the design cost, thus enhances the enterprise's competition ability. The system analyzes the characteristics of shaft parts, establishes a fast parameterized modeling method, and sets up the material and rendering of the modeling results. Finally, a calculation and analysis module is created to analyze the structure of the design results, thereby optimizing the design results. Finally, a typical axis is created by using the developed software, and the result is set up and calculated and analyzed, which proves the superiority and practicability of the software.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH133.2;TP391.72

【引證文獻】

相關碩士學位論文 前1條

1 徐紹明;非晶材料甩帶機及其參數化設計[D];太原科技大學;2013年

，

本文編號：2094382