本文選題：變形造型技術 + ACIS��； 參考：《廣東工業大學》2012年碩士論文

【摘要】：變形造型技術在現代科學技術的各個領域得到了廣泛的應用。在機械行業,特別是產品概念設計或是逆向工程中數據處理當中,為了讓產品的外觀滿足人們的視覺效果,或者讓重構的模型精度提高,通過添加各種約束使模型發生變化,達到理想的效果。本文通過研究基于能量法變形造型原理,ACIS造型組件變形模塊,HOOPS組件的渲染技術等,結合這些技術開發出了一套基于ACIS平臺的變形造型系統,并應用于逆向工程領域。 本文將ACIS幾何造型技術與HOOPS模型顯示技術相結合,給出了變形造型系統的功能,并討論了各功能模塊之間的聯系,同時對變形造型系統的建模功能模塊、變形功能模塊、顯示功能模塊做了詳細的功能設計。主要完成的工作和結論如下： 1)論述B樣條曲線曲面的基本性質和基于能量優化法曲線曲面變形的基本理論,介紹了ACIS、HOOPS及InterOp三大組件,為變形造型系統的開發提供了理論依據。 2)聯系逆向工程數據處理的實際情況,認真做了調研分析,提出了變形造型系統的功能架構,并定義了各功能模塊。 3)變形造型系統各功能模塊的開發。根據各功能模塊的設計要求,完成了各功能模塊的開發。 4)提出了SAT格式文件與STL文件相互轉化的方法,彌補了InterOp對常用格式文件轉化的不足。 5)在論文的最后一章,通過兩個實驗來驗證該變形系統實踐當中的應用。個是在逆向工程數據融合方面的應用,另一個是產品的概念設計方面的應用。
[Abstract]:Deformation modeling technology has been widely used in various fields of modern science and technology. In the mechanical industry, especially in product conceptual design or reverse engineering data processing, in order to make the appearance of the product meet the visual effect of people, or to improve the precision of the reconstructed model, the model changes by adding various constraints. Achieve the desired effect. In this paper, based on the principle of energy deformation modeling, the rendering technology of ACIS modeling module deformation module / hoops component is studied, and a set of deformation modeling system based on ACIS platform is developed, which is applied in reverse engineering field. This paper combines ACIS geometric modeling technology with HOOPS model display technology, gives the function of deformation modeling system, and discusses the relationship between each function module. At the same time, the modeling function module and deformation function module of deformation modeling system are discussed. The display function module has made the detailed function design. The main works and conclusions are as follows: 1) the basic properties of B-spline curve and surface and the basic theory of curve and surface deformation based on energy optimization method are discussed. It provides a theoretical basis for the development of the deformation modeling system. 2) in connection with the actual situation of reverse engineering data processing, the paper makes a careful investigation and analysis, and puts forward the functional framework of the deformation modeling system. Each function module is defined. 3) the development of each function module of deformation modeling system. According to the design requirements of each functional module, the development of each functional module is completed. 4) the method of converting SAT format file and STL file is put forward. 5) in the last chapter of the thesis, two experiments are carried out to verify the application of the deformable system in practice. One is the application of reverse engineering data fusion, the other is the application of product conceptual design.
【學位授予單位】：廣東工業大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH122;TP391.72

【參考文獻】

相關期刊論文 前3條

1 席平,經玲,唐榮錫;用變形模型整體構造B樣條曲面方法研究[J];北京航空航天大學學報;1999年04期

2 宋德軍,朱心雄;基于數學規劃的曲面造型方法[J];工程圖學學報;1997年Z1期

3 馬登富;楊雪榮;成思源;張湘?zhèn)?;基于ACIS平臺的變形造型技術[J];廣東工業大學學報;2011年04期

相關博士學位論文 前2條

1 周曉杰;曲線曲面造型中的變形方法研究與應用[D];大連理工大學;2008年

2 薛均曉;保形映射理論在幾何造型中的某些應用研究[D];大連理工大學;2009年

相關碩士學位論文 前1條

1 欒小冬;基于ACIS的齒輪切齒仿真方法及其軟件系統研究[D];重慶大學;2006年

，

本文編號：2075535