本文選題：異質材料零件 + 微滴噴射��； 參考：《南京師范大學》2014年碩士論文

【摘要】：近年來,隨著科學技術的發展,對各類零件的性能要求越來越高,在這種情況下,傳統制造中用單一的材料構成的普通零件已難以滿足各類近乎苛刻的使用條件。這使得異質材料零件成型的數字化微滴噴射控制技術研究成為先進制造技術領域的前沿課題之一。 本文以基于光固化3DP印刷工藝的異質材料零件數字化設計制造展開探索研究。 1)分析了微滴噴射與UV光固化的研究與發展現狀以及現在這兩領域的熱點問題,闡述了常規的光固化工藝的優缺點,為了優化工藝,將微滴噴射與UV光固化相結合,為異質材料零件成形提供了可能。 2)重點針對異質材料零件難以制造的問題,本文構建了基于光固化3DP印刷工藝的異質材料零件的成形系統裝置。對異質材料零件成形系統的機械系統、控制系統、軟件系統等展開研究,并對異質材料零件成形裝置的控制系統進行重點研究。 3)基于搭建好的成形裝置,本文對異質材料零件模型進行了大量的成形測試與數據分析,運用正交實驗法分析影響UV固化圖層品質的主要工藝參數,以成形精度和光澤度等為評價指標,通過試驗對工藝參數進行優化。使用優化后的工藝參數對異質材料零件進行加工成形,實驗結果表明成形系統各項指標和性能都己達到了設計目標。 本文所設計搭建的異質材料零件的成形系統平臺為多材料零件的集成化設計與快速制造奠定了基礎。
[Abstract]:In recent years, with the development of science and technology, the performance requirements of all kinds of parts are becoming more and more high. In this case, it is difficult to meet all kinds of almost harsh operating conditions of ordinary parts made of single material in traditional manufacturing. This makes the research of digital micro-droplet injection control technology of heterogeneous material parts become one of the frontier topics in the field of advanced manufacturing technology. In this paper, the digital design and manufacture of heterogeneous material parts based on light curing 3DP printing process are studied. 1) the research and development status of micro droplet injection and UV curing and the hot issues in these two fields are analyzed. In this paper, the advantages and disadvantages of conventional light curing technology are described. In order to optimize the process, the combination of micro droplet injection and UV light curing provides the possibility for the forming of heterogeneous material parts. 2) focusing on the problem that it is difficult to manufacture heterogeneous material parts. In this paper, the forming system of heterogeneous material parts based on light curing 3DP printing process is constructed. The mechanical system, control system, software system and so on of the forming system of the heterogeneous material parts are studied, and the control system of the forming device of the heterogeneous material part is studied emphatically. In this paper, a large number of forming tests and data analysis are carried out on the heterogeneous material part model. The main process parameters affecting the quality of UV curing layer are analyzed by orthogonal experiment method. The forming accuracy and glossiness are taken as the evaluation indexes. The process parameters were optimized by experiment. The optimized process parameters are used to process the heterogeneous material parts. The experimental results show that the parameters and properties of the forming system have reached the design goal. The platform of forming system for heterogeneous parts in this paper lays a foundation for integrated design and rapid manufacturing of multi-material parts.
【學位授予單位】：南京師范大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TH16

【參考文獻】

相關期刊論文 前10條

1 楊繼全,侯麗雅,章維一,殷志東,陳莉;基于變芯徑光纖的光學系統在光造型中的應用[J];光學學報;2002年04期

2 顏永年 ,張人佶 ,單忠德 ,盧清萍;快速模具技術的最新進展及其發展趨勢[J];航空制造技術;2002年04期

3 張人佶,盧清萍,宋玉華,單忠德,梁劍江,顏永年;基于CAD/CAM/RPM的快速模具制造技術[J];計算機輔助設計與制造;2000年04期

4 張鴻海;朱天柱;曹澍;舒霞云;孫博;胡燕;;基于噴墨打印機的三維打印快速成型系統開發及實驗研究[J];機械設計與制造;2012年07期

5 朱玉芳;楊繼全;王昌明;;異質材料零件的集成設計與制造研究[J];機械設計;2012年06期

6 朱玉芳;楊繼全;王昌明;;基于空間微四面體的異質材料零件建模方法[J];機械工程學報;2012年01期

7 章維一,侯麗雅;微流體數字化的科學與技術問題(I):概念、方法和效果[J];科技導報;2005年08期

8 章維一;侯麗雅;;微流體數字化的科學與技術問題(Ⅱ):物質數字化及物質能量信息統一數字化概念研究[J];科技導報;2006年03期

9 袁向麗;張攀;孫雙雙;;SiC晶須砂輪的晶須定向及切割性能的初步研究[J];現代制造技術與裝備;2009年06期

10 吳任東,魏大忠,周浩穎,顏永年;三維數字微滴噴射成形技術的發展現狀[J];新技術新工藝;2004年02期

相關博士學位論文 前1條

1 謝丹;微光學器件的氣動膜片式微滴噴射制造技術研究[D];華中科技大學;2010年

，

本文編號：2030965