本文選題：壓縮機 + 固有頻率��； 參考：《機械設計與制造》2016年08期

【摘要】：基于柳州某移動式壓縮機生產調試和老化試驗中出現門板因震動產生的噪聲和焊接件變形開裂等問題。在結合有限元理論基礎上提出利用有限元仿真軟件對體單元、殼單元及殼梁單元三種不同的網格單元的門板結構固有頻率進行分析計算,并采取實驗手段對仿真結果分析比較。得出不同網格劃分時門板結構在有限元分析中的運算特點,從數據的對比可以看出殼梁混合單元算法是解決此類門板結構件固有頻率的最合理的算法。此方法為后續類似結構的有限元分析找到合理的網格劃分依據,從而節省設計與分析的時間提高設計效率。
[Abstract]:Based on the problems of noise caused by vibration and deformation and cracking of welded parts in the production debugging and aging test of a mobile compressor in Liuzhou. Based on the finite element theory, the natural frequencies of three kinds of grid elements, such as body element, shell element and shell beam element, are analyzed and calculated by finite element simulation software, and the simulation results are analyzed and compared by means of experiment. From the comparison of the data, it can be seen that the hybrid element algorithm of shell and beam is the most reasonable algorithm to solve the natural frequency of this kind of door structure. This method can provide a reasonable basis for the finite element analysis of similar structures, thus saving the time of design and analysis to improve the design efficiency.
【作者單位】： 廣西科技大學;
【分類號】：TH45
，

本文編號：1897076