本文選題：自頂向下設計 + 多骨架模型��； 參考：《機械設計與制造》2016年06期

【摘要】：為解決產品自頂向下設計過程中設計參數完全受控于頂層骨架模型的局限性和設計單元重用時導致參照關系混亂的現象,提出以多骨架模型對設計信息進行分類管理和分層控制的自頂向下設計方法。首先根據骨架模型包含的參數和在設計過程中實現的功能定義定位骨架、信息傳遞骨架和設計骨架的概念;然后介紹分層遞階的多骨架建模方法。以Pro/E為設計平臺,結合自卸車產品設計實例,驗證了該方法的可行性和有效性。
[Abstract]:In order to solve the problem that the design parameters are completely controlled by the top-level skeleton model in the top-down design process, and the confusion of the reference relationship caused by the reuse of the design unit, A top-down design method based on multi-skeleton model for classified management and hierarchical control of design information is proposed. Firstly, the concepts of skeleton, information transfer skeleton and design skeleton are defined according to the parameters contained in the skeleton model and the functions realized in the design process, and then the hierarchical multi-skeleton modeling method is introduced. The feasibility and effectiveness of this method are verified by using Pro/E as design platform and an example of product design of dump truck.
【作者單位】： 太原理工大學機械工程學院;
【分類號】：TH122

【相似文獻】

相關期刊論文 前6條

1 曹雪玉;;基于骨架模型的打孔機自頂向下設計[J];企業技術開發;2012年28期

2 高葛;;基于Pro/E骨架模型的漿體泵泵體的參數化設計[J];機械;2011年04期

3 謝英星;;基于Pro/E骨架模型的管道閥門參數化設計[J];煤礦機械;2014年06期

4 張彬;;基于骨架模型的軸承設計[J];吉林化工學院學報;2008年02期

5 高葛;;基于Pro/E骨架模型的閥體參數化設計[J];西安航空技術高等�？茖W(xué)校學報;2011年03期

6 ;[J];;年期

，

本文編號：1835216