本文選題：純電動扒渣車　切入點：勢能回收　出處：《機械設計與制造》2016年06期

【摘要】：純電動扒渣車的勢能回收系統有很多種設計方案,方法的不同直接影響勢能回收的效果,并且回收系統中各個關鍵元件的參數對回收效果也有著很大的影響。為了提高純電動扒渣車動臂勢能回收系統的回收效率,針對電動扒渣車的結構特點和特性,設計了一種純電動扒渣車的動臂勢能回收方案,并對其進行關鍵元件參數初步匹配計算;在此基礎上基于遺傳算法對匹配后的參數進行了優化;利用AMEsim與Matlab-simulink進行建模和聯合仿真,結果表明回收方案可行,參數匹配效果良好。
[Abstract]:There are many design schemes for the potential energy recovery system of the pure electric slag pick-up car. The different methods directly affect the effect of the potential energy recovery. And the parameters of each key component in the recovery system also have a great influence on the recovery effect. In order to improve the recovery efficiency of the moving arm potential energy recovery system of the pure electric slag pick-up car, the structural characteristics and characteristics of the electric slag pick-up car are pointed out. In this paper, a scheme of potential energy recovery of moving arm of pure electric scraps is designed, and the parameters of key components are preliminarily matched, and the parameters after matching are optimized based on genetic algorithm. AMEsim and Matlab-simulink are used for modeling and simulation. The results show that the recovery scheme is feasible and the parameter matching effect is good.
【作者單位】： 合肥工業大學機械與汽車工程學院;
【分類號】：TH243

【相似文獻】

相關碩士學位論文 前1條

1 趙園園;液壓混合動力裝載機參數匹配問題研究[D];長安大學;2015年

，

本文編號：1684197