本文選題：本體　切入點：產品配置　出處：《哈爾濱理工大學》2011年碩士論文　論文類型：學位論文

【摘要】：隨著社會經濟和互聯網的飛速發展,企業間的市場競爭日益加劇,傳統的制造業面臨著嚴峻的挑戰。消費者對個性化產品的追求已進入白熾化階段,有著不同的消費水平、職業特點和興趣愛好的客戶總是希望在產品的生產過程中加入自己的個性化條件,因此企業在滿足客戶個性化需求的同時必須對自身的生產模式作出相應調整。無論從客戶需求條件向產品相關技術轉換,還是從產品生產成本及交貨時間來說,企業必須以短時間,低成本,高效率的生產模式來響應消費者的需求。因此,企業急需建立快速、準確的產品配置系統平臺來實現產品的生產管理。 本文在總結產品快速配置系統的理論及模型建立的基礎上,針大規模定制下產品快速配置問題,提出了基于產品族的DFMC(Design for Mass Customization)的產品配置方法,并將本體融入到產品配置知識中,首先通過質量功能配置工具將客戶需求轉化為產品的技術要求并建立客戶需求本體模型(CRO),再由產品功能相似性原理及企業現有產品相結合,建立相應產品族模型并建立產品族本體模型(PFO)。最后通過CRO與PFO間的映射來定位與客戶需求最相似的產品族,實現了以客戶需求為導向的個性化產品快速生產。本文最后以減速器產品為例,建立了完整的減速器產品配置系統模型及相應的CRO、PFO模型,并提出了基于屬性匹配原則的映射算法,有效地實現了從客戶個性化需求到產品實際生產的過程,為滿足個性化產品生產及完善產品快速配置平臺理論奠定了基礎。
[Abstract]:With the rapid development of social economy and Internet, the market competition among enterprises is becoming more and more serious. The traditional manufacturing industry is facing severe challenges. Consumers' pursuit of personalized products has entered the stage of incandescence and has different consumption levels. Professional characteristics and interests of customers always want to add their own personalized conditions in the production process, Therefore, enterprises must adjust their own production mode in order to meet the individual needs of their customers. Whether from customer demand conditions to product-related technologies, or from the production cost and delivery time, Enterprises must respond to the needs of consumers with a short time, low cost and high efficiency production mode. Therefore, enterprises urgently need to establish a rapid and accurate product configuration system platform to achieve product production management. On the basis of summarizing the theory and model establishment of product rapid configuration system, this paper proposes a product configuration method based on product family DFMC(Design for Mass customization. The ontology is integrated into the product configuration knowledge. Firstly, the customer requirement is transformed into the technical requirement of the product through the quality function configuration tool, and the customer requirement ontology model is established. Then, the principle of product function similarity and the existing products of the enterprise are combined. The corresponding product family model and the product family ontology model are established. Finally, the mapping between CRO and PFO is used to locate the product family that is most similar to the customer's needs. The rapid production of individualized products based on customer demand is realized. Finally, taking the reducer product as an example, a complete product configuration system model of reducer and the corresponding CRO PFO model are established. A mapping algorithm based on attribute matching principle is proposed, which can effectively realize the process from customer's individuation requirement to product actual production, which lays a foundation for satisfying individualized product production and perfecting the theory of product rapid configuration platform.
【學位授予單位】：哈爾濱理工大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH132.46;TP391.7

【參考文獻】

相關期刊論文 前8條

1 岳同啟,王吉軍,王海軍,盛晉珩;智能客戶需求獲取系統的結構設計[J];大連大學學報;2003年04期

2 姜慧,徐燕申,謝艷,林漢元;機械產品模塊化設計總體規劃方法的研究[J];機械設計;1999年12期

3 高鵬,林蘭芬,蔡銘,董金祥;基于本體映射的產品配置模型自動獲取[J];計算機集成制造系統-CIMS;2003年09期

4 譚建榮,李濤,戴若夷;支持大批量定制的產品配置設計系統的研究[J];計算機輔助設計與圖形學學報;2003年08期

5 ;CASE-BASED PRODUCT CONFIGURATION AND REUSE IN MASS CUSTOMIZATION[J];Chinese Journal of Mechanical Engineering;2004年02期

6 王愛民,孟明辰,黃靖遠;通過動態QFD實現需求驅動的產品族設計方法研究[J];中國機械工程;2003年08期

7 鄭華林,劉飛,王逢春,宛西原,伍良靖;面向大規模定制的產品需求建模方法研究[J];中國機械工程;2003年06期

8 張勁松,薛春芳,劉清華,鐘毅芳;面向開發鏈的產品智能化配置技術[J];中南民族大學學報(自然科學版);2005年03期

相關博士學位論文 前1條

1 高飛;面向大批量定制的產品設計方法學研究[D];浙江大學;2004年

，

本文編號：1643625