本文選題：旋葉式壓縮機　切入點：數學模型　出處：《重慶大學》2011年碩士論文　論文類型：學位論文

【摘要】：隨著汽車工業的迅猛發展,汽車空調系統也越來越受到了重視。制冷壓縮機作為汽車空調的核心同時得到了飛速的發展。 旋葉式壓縮機具有結構簡單、體積小、維修方便、動力平衡性好等優點在壓縮機市場具有極大的潛力。本文在以往的對旋葉式壓縮機研究的基礎上,對旋葉式壓縮機做了進一步的研究。主要有以下幾方面: 1、具有普遍適用性的旋葉式壓縮機葉片頭部型線; 通過對葉片頭部型線深入的研究,創造性的提出一種具有普遍應用性的葉片頭部型線,適用于任何的旋葉式壓縮機氣缸型線。具有均勻磨損、易于制造以及良好的潤滑、密封性等優點。 2、建立旋葉式壓縮機的壓縮氣體狀態模型同時對排氣量模型進行深入研究; 通過對旋葉式壓縮機工作過程中基元的變化,及氣體的性質對壓縮氣體的壓力做了深入的探討,同時對油氣兩相泄漏做了深入的研究,在此基礎上建立了排氣量模型。 3、建立旋葉式壓縮機的運動學、動力學模型以及功率效率模型; 通過以葉片圓心的軌跡作為氣缸型線的替代,省略了對葉片頭部型線與氣缸內壁接觸點的復雜求解過程,根據運動學、動力學原理,對旋葉式壓縮機葉片建立運動學動力學模型,大大簡化了其復雜程度并且具有足夠的準確度。同時對旋葉式壓縮機的功率以及效率問題做了進一步的分析。 4、開發計算機輔助設計系統。 通過以上的數學模型,通過對其進行數值計算以及數據整理,整理之后的數據通過使用C++Builder6.0對其仿真,實現旋葉式壓縮機的設計實現快速可視化,真正的做到設計、分析、制造一體化,大大的加快旋葉式壓縮機的設計分析速度。
[Abstract]:With the rapid development of automobile industry, more and more attention has been paid to automobile air conditioning system. As the core of automobile air conditioning, refrigeration compressor has been developed rapidly. The rotary vane compressor has great potential in compressor market with the advantages of simple structure, small volume, convenient maintenance and good power balance. Further research on the rotary vane compressor has been done. The main contents are as follows:. 1. The blade head profile of the rotary vane compressor with universal applicability; Through the deep research on the blade head profile, a kind of blade head line with universal application is creatively proposed, which is suitable for any rotary vane compressor cylinder line. It has uniform wear, easy manufacture and good lubrication. The advantage of sealing, etc. (2) the compressed gas state model of rotary vane compressor is established and the exhaust volume model is studied deeply. The pressure of compressed gas is deeply discussed through the change of unit in the working process of rotary vane compressor and the nature of gas. At the same time, the leakage of two phases of oil and gas is studied deeply, and the exhaust volume model is established. 3. The kinematics, dynamics model and power efficiency model of rotary vane compressor are established. By using the track of the center of the blade as the replacement of the cylinder profile, the complex solution process of the contact point between the blade head profile and the cylinder inner wall is omitted. According to the kinematics and dynamics principle, The kinematics and dynamics model of the blade of the rotary vane compressor is established, which greatly simplifies its complexity and has sufficient accuracy. At the same time, the power and efficiency of the rotary vane compressor are further analyzed. 4. Develop computer aided design system. Through the above mathematical model, through the numerical calculation and data collation, the data after finishing through the use of C Builder6.0 to its simulation, the design of the rotary vane compressor to achieve rapid visualization, truly achieve design, analysis, Manufacturing integration, greatly accelerate the speed of design and analysis of rotary vane compressor.
【學位授予單位】：重慶大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH45

【參考文獻】

相關期刊論文 前10條

1 張雨英;楊晨;;旋葉式壓縮機工作過程模擬的研究[J];計算機仿真;2006年03期

2 孫銅生,楊會林,孔祥志;滑片式壓縮機泄漏分析及其計算模型的研究[J];機械設計與制造;2005年02期

3 王加鋒;王樹林;朱巖;;旋葉式壓縮機轉子的有限元模態分析[J];機械設計;2009年01期

4 宋立權;趙孝峰;刁錦瑞;李成武;;基于三圓弧的旋葉式壓縮機新型線葉片設計[J];機械工程學報;2009年06期

5 何云信;劉曉婧;周鑫聰;;三腔旋葉式壓縮機設計[J];機械研究與應用;2006年06期

6 譚智超,王如竹,吳進發,鄧定國;旋轉氣缸制冷壓縮機的實驗研究[J];流體機械;1997年04期

7 馬國遠,郁永章;雙工作腔滑片壓縮機的試驗研究[J];流體機械;1998年11期

8 馬國遠,彥啟森,郁永章;雙工作腔滑片壓縮機結構參數的優化[J];流體機械;2000年10期

9 刁錦瑞;宋立權;王穎超;;旋葉式壓縮機計算機輔助分析研究[J];流體機械;2006年11期

10 辛電波;馮健美;賈曉晗;彭學院;;微小間隙內油氣兩相泄漏的試驗研究[J];潤滑與密封;2008年11期

相關碩士學位論文 前3條

1 張雨英;旋葉式壓縮機的數值模擬與工作過程仿真[D];重慶大學;2005年

2 刁錦瑞;旋葉式壓縮機動力分析設計研究[D];重慶大學;2006年

3 陶平安;旋葉式壓縮機工作過程的數值模擬[D];重慶大學;2009年

，

本文編號：1630179