本文選題：設計重用　切入點：設計資源　出處：《武漢理工大學》2012年碩士論文　論文類型：學位論文

【摘要】：隨著制造業市場需求的變化,大規模設計模式已經不再適應當今的的市場,現在的市場已經和以前不同,客戶提出了各種各樣的個性化需求。對市場做出快速的響應是企業的核心競爭力。在這種情況下,形成了大規模定制模式,模塊化設計、可重用設計得到了廣泛的應用,產品數據管理(PDM)成為了主要的設計平臺。CAD模型作為一類重要設計資源,其數量隨著三維CAD技術推廣而劇增。為了提高設計資源的可重用性,從而減少企業產品開發的成本,論文圍繞構建可重用設計資源、可重用設計資源的管理、可重用設計資源的編碼等關鍵技術展開研究。具體內容如下： (1)通過對PDM軟件系統的體系結構和設計重用單元進行深入的研究以后,提出了基于PDM的可重用設計體系結構。 (2)探討了基于PDM平臺構建可重用設計資源的關鍵技術,并對各種設計技術對設計重用的支持性進行了分析。結合具體企業的產品給出了具體的構建方法。 (3)針對企業中不同的設計資源,采用不同的方法來進行構建,同時探討了如何在PDM平臺上對設計資源進行管理,對基于PDM的產品開發模式也進行了研究。詳述了基于PDM平臺之上重用設計資源的管理方法、設計重用單元的引用模式及面向檢索的數據屬性設計方法。 (4)通過企業信息化需求的分析,探討了企業編碼的過程中一些尤其值得注意的問題。結合企業的產品特點,提出了設計資源的編碼的原則,設計了設計資源編碼體系,最后基于EPDM平臺開發了可重用設計資源的編碼器,提高了企業的可重用設計資源的利用。 上述研究方法在企業得到了應用,實踐證明構建基于PDM的可重用設計資源,減少了企業的冗余數據,縮短了企業的交貨期,提高了產品的設計效率,最終提高了企業的核心競爭力。
[Abstract]:With the changing demand in the manufacturing market, large-scale design patterns are no longer adapted to today's market, and the market is different now than before. Customers put forward a variety of personalized requirements. Rapid response to the market is the core competitiveness of the enterprise. In this case, a mass customization model, modular design, reusable design has been widely used. Product data Management (PDM) has become the main design platform. As a kind of important design resources, the number of PDMs has increased dramatically with the popularization of 3D CAD technology. In order to improve the reusability of design resources and reduce the cost of enterprise product development, This paper focuses on the construction of reusable design resources, reusable design resources management, reusable design resources coding and other key technologies. 1) after deeply studying the architecture and design reuse unit of PDM software system, a reusable design architecture based on PDM is proposed. This paper discusses the key technologies of building reusable design resources based on PDM platform, and analyzes the support of various design technologies for design reuse. The concrete construction method is given in combination with the products of specific enterprises. 3) aiming at different design resources in enterprises, different methods are used to construct them. At the same time, how to manage design resources on PDM platform is discussed. The management method of reusing design resources based on PDM platform, the reference pattern of design reuse unit and the method of data attribute design for retrieval are also studied in this paper. Based on the analysis of enterprise information demand, some problems in the process of enterprise coding are discussed. According to the characteristics of enterprise products, the principle of design resource coding is put forward, and the design resource coding system is designed. Finally, the encoder of reusable design resources is developed based on EPDM platform, which improves the utilization of reusable design resources in enterprises. The above research method has been applied in the enterprise. The practice proves that the construction of reusable design resources based on PDM reduces the redundant data of the enterprise, shortens the delivery time of the enterprise, and improves the design efficiency of the product. Finally, improve the core competitiveness of enterprises.
【學位授予單位】：武漢理工大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH186

【參考文獻】

相關期刊論文 前9條

1 胡首,陶德馨,陳定方;基于PDM框架的CBD系統研究開發[J];湖北工學院學報;2003年02期

2 趙鳳強;徐毅;李廣強;;基于Web服務的零部件參數化設計重用[J];計算機工程;2011年04期

3 魯玉軍,余軍合,祁國寧,吳揚東;基于事物特性表的產品變型設計[J];計算機集成制造系統-CIMS;2003年10期

4 齊峰,譚建榮,張樹有,王世偉;面向大規模定制設計的資源可重用模型及過程[J];計算機集成制造系統-CIMS;2004年05期

5 武守飛;潘曉弘;張勇;吳鵬程;;面向大批量定制的設計重用支撐平臺研究[J];計算機集成制造系統;2009年02期

6 蔡波,陸繼翔,陸長德,楊海成;產品概念設計重用研究[J];機械科學與技術;2002年04期

7 王玉;產品設計重用技術支持體系研究[J];機械科學與技術;2004年06期

8 林宋,劉勇;產品設計意圖的建模研究[J];現代制造工程;2003年06期

9 張濤,史俊友;PDM環境下基于設計重用的零件族管理系統[J];現代制造工程;2004年12期

相關碩士學位論文 前4條

1 高原;PDM需求分析及實施技術的研究與應用[D];武漢理工大學;2011年

2 姚紅;面向大規模定制的產品數據管理編碼研究[D];廣西大學;2005年

3 郭安東;面向制造業信息化的信息分類編碼系統的研究與開發[D];山東大學;2006年

4 陳營;基于Pro/Engineer的機械零件參數化特征庫的研究[D];山東大學;2007年

，

本文編號：1604858