本文選題：起重機　切入點：指標體系　出處：《中國礦業大學》2014年碩士論文　論文類型：學位論文

【摘要】：通用橋式起重機作為國民生產建設中不可或缺的大型能耗設備，其逐年增長的巨大能量消耗已引起節能領域工作者和政府決策者的密切關注。建立和考核起重機械能耗評價體系、開展起重機械能耗檢測技術研究等相關節能工作，可以為使用者更好的了解起重機自身的能耗情況、選擇節能型號提供相關依據，為政府職責部門進行起重機械節能領域的監管和審查提供技術支撐。 本論文完成了基于無線傳感網的起重機能耗感知系統分析、研究與設計。首先，本文在分析起重機能耗特性的基礎上，完成起重機主要能耗機構的數學建模，依據該數學模型以及起重機能耗評價指標體系的構建原則，確立了起重機能耗評價指標體系，并提出了一種基于“黑箱理論”的起重機能耗動態測量法，設計能耗感知系統的總體方案。隨后，針對起重機輸入電功率和輸出機械功率中的相關擬測參數，，設計檢測方案，配置相關檢測傳感設備，同時針對無線傳感器網絡的三個關鍵技術，對適用于起重機工作環境的無線傳感器網絡進行了相關探討，并重點設計了無線傳感器節點的軟硬件和采樣數據分析上位機軟件，完成通用橋式起重機的能耗感知系統的設計。 最后，依托本論文設計的硬件平臺，分別在實驗室和起重機工作現場兩種環境下，通過對系統輸入電參數的實時檢測、無線傳輸以及上位機處理，驗證了本論文設計的能耗感知系統工作的可靠性。
[Abstract]:As an indispensable large energy consumption equipment in the national production and construction, the universal bridge crane, The huge energy consumption which has been increasing year by year has attracted the close attention of workers in the field of energy conservation and government decision makers. The establishment and assessment of energy consumption evaluation system for lifting machinery, the development of energy consumption detection technology research and other related energy-saving work. It can provide the users with a better understanding of the energy consumption of the crane itself, select the energy-saving model to provide relevant basis, and provide technical support for the government responsibility department to supervise and examine the field of energy saving of lifting machinery. This paper completes the analysis, research and design of crane energy consumption sensing system based on wireless sensor network. Firstly, based on the analysis of crane energy consumption characteristics, this paper completes the mathematical modeling of the main crane energy consumption mechanism. According to the mathematical model and the construction principle of crane energy consumption evaluation index system, a crane energy consumption evaluation index system is established, and a dynamic measurement method of crane energy consumption based on "black box theory" is proposed. Design the overall scheme of the energy consumption sensing system. Then, for the crane input electric power and output mechanical power of the relevant parameters, design the detection scheme, configure the related detection sensing equipment, At the same time, aiming at the three key technologies of wireless sensor network, the paper discusses the wireless sensor network suitable for crane working environment, and designs the software and hardware of wireless sensor node and the software of sampling data analysis. The design of energy consumption sensing system of bridge crane is completed. Finally, relying on the hardware platform designed in this paper, in the laboratory and crane work field environment, through the real-time detection of the system input electrical parameters, wireless transmission and host computer processing, The reliability of the energy consumption sensing system designed in this paper is verified.
【學位授予單位】：中國礦業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TH215

【參考文獻】

相關期刊論文 前9條

1 俎云霄,龐浩,李東霞,王贊基;一種基于Hilbert數字濾波的無功功率測量方法[J];電力系統自動化;2003年16期

2 王曉波;趙霞;裴文華;;橋式起重機起升系統動力學模型及動載計算[J];湖北工業大學學報;2012年04期

3 朱鈺;許順隆;劉少輝;莫善鋒;胡甫才;;液壓起重機安全監控系統的開發[J];武漢理工大學學報(交通科學與工程版);2008年04期

4 王松雷;;橋門式起重機節能設計研究[J];建筑機械;2010年17期

5 李偉;李瑞華;;起重機智能控制的發展現狀與思考[J];煤礦機械;2006年08期

6 葉偉;童一飛;李東波;李向東;錢夏夷;;基于Web的橋式起重機節能評價系統的設計與開發[J];起重運輸機械;2013年06期

7 劉子京;裴文江;;基于ZigBee協議的無線傳感器網絡研究[J];計算機技術與發展;2009年05期

8 李亮,闕沛文,陳亮;新型霍爾傳感器在電流檢測中的應用[J];儀表技術與傳感器;2005年04期

9 彭瑜;;工業自動化和控制環境下實現無線通信的新近動態和標準進展[J];自動化博覽;2007年02期

本文編號：1595189