柔性銷軸風電行星齒輪傳動強度研究
本文關鍵詞: 風電齒輪箱 行星傳動 柔性銷軸 強度 有限元 出處:《重慶大學》2012年碩士論文 論文類型:學位論文
【摘要】:風電產業的迅速發展對風力發電機組齒輪箱運轉的穩定性及可靠性提出了很高的要求。深入研究風電齒輪箱行星齒輪傳動的強度,對提高齒輪承載能力及傳動的平穩性有一定的指導作用。本文以1.5兆瓦風電行星齒輪傳動系統為主要研究對象,對其柔性銷軸行星齒輪傳動強度進行研究。 論文的研究?jī)?nèi)容如下: 1、對國內外風電齒輪箱的主要結構形式及其優缺點進行分析;介紹1.5兆瓦柔性銷軸風電齒輪箱的基本結構和傳動原理、柔性銷軸的均載機理,為柔性銷軸風電行星齒輪傳動的強度分析提供理論基礎。 2、對1.5兆瓦柔性銷軸風電齒輪箱行星齒輪傳動的接觸強度、彎曲強度和柔性銷軸彎曲應力和撓度進行分析計算。為柔性銷軸風電行星齒輪傳動的有限元分析和試驗研究提供理論依據。 3、采用Pro/ENGINEER進行柔性銷軸風電行星齒輪傳動三維實體建模,利用ABAQUS有限元分析軟件對行星齒輪傳動的接觸強度、彎曲強度和柔性銷軸彎曲應力和撓度進行數值模擬,并與經典力學計算結果進行比較,驗證有限元模型的可靠性。 4、通過對柔性銷軸風電行星輪系中內齒圈的輪齒進行齒根彎曲應力試驗研究,驗證理論分析的可靠性。
[Abstract]:Requires a high stability and reliability of the rapid development of wind power industry for the wind turbine gearbox operation. The further study of wind power gear box planetary gear transmission intensity, has certain significance to improve the bearing capacity and stability of transmission gear. The 1.5 MW wind power system for planetary gear transmission the object of study, research on the flexible pin shaft planetary gear transmission intensity.
The research contents of this paper are as follows:
1, the domestic and foreign wind power gear box of the main structure and analyzes the advantages and disadvantages of 1.5 MW; introduced flexible pin basic structure and transmission principle of wind turbine gearbox, load balancing mechanism of flexible shaft, provide a theoretical basis for the strength of the wind power of planetary gear transmission with flexible pins.
2, the contact strength, flexural strength and flexural stress and deflection of the 1.5 megawatt flexible pin shaft wind turbine gearbox planetary gear transmission are analyzed and calculated. It provides a theoretical basis for finite element analysis and experimental research of the flexible pin shaft wind power planetary gear transmission.
3, using Pro/ENGINEER flexible pin shaft wind power planetary gear 3D solid modeling, using ABAQUS finite element analysis software for planetary gear contact strength, bending strength and flexible pin bending stress and deflection are simulated, and the calculated results are compared with the classical mechanics, verify the reliability of finite element model.
4, through the study of the tooth root bending stress test on the teeth of the inner gear ring of the flexible pin shaft, the reliability of the theoretical analysis is verified.
【學位授予單位】:重慶大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TM315;TH132.425
【參考文獻】
相關期刊論文 前10條
1 阮向艷;;兆瓦級風力發電機組試驗系統[J];大功率變流技術;2009年02期
2 朱才朝;羅召霞;寧杰;劉偉輝;;新型雙曲柄內齒環行星減速器的接觸分析[J];重慶大學學報;2009年04期
3 許洪斌,張光輝,錢振明;分階式雙漸開線齒輪彎曲應力的光彈性試驗[J];重慶大學學報(自然科學版);1998年03期
4 薛春玉,郭懋林,,嚴勇,吳忠明;某直升機螺旋傘齒輪三維光彈性應力分析[J];哈爾濱工業大學學報;1995年05期
5 劉更,吳立言;內嚙合直齒輪的三維接觸應力分析[J];計算結構力學及其應用;1994年01期
6 H.Winter;朱夢周;;齒輪承載能力計算的進展(齒輪計算方法的進展)[J];齒輪;1986年06期
7 樊世耀;梁新文;曹金水;;兆瓦級機械功率全封閉試驗臺[J];機械傳動;2011年09期
8 方宗德;齒輪輪齒承載接觸分析(LTCA)的模型和方法[J];機械傳動;1998年02期
9 唐進元,周長江,吳運新;齒輪彎曲強度有限元分析精確建模的探討[J];機械科學與技術;2004年10期
10 李潤方,林騰蛟,陳兵奎,林超;寬斜齒輪嚙合過程三維接觸有限元分析[J];機械科學與技術;1997年03期
相關碩士學位論文 前6條
1 唐飛熊;兆瓦級風力發電機齒輪傳動系統的動力學特性和可靠性研究[D];重慶大學;2011年
2 羅家元;齒輪箱系統耦合動態特性研究[D];重慶大學;2004年
3 施火結;漸開線變位齒輪參數化精確造型與齒根應力分析的研究[D];福建農林大學;2007年
4 賀云花;斜齒輪強度的三維參數化有限元分析[D];山東大學;2007年
5 魏義存;風電齒輪嚙合瞬態性能分析[D];華北電力大學(北京);2008年
6 趙琴;多兆瓦級風力發電機行星齒輪箱的研究和行星齒輪的有限元分析[D];新疆農業大學;2009年
本文編號:1548092
本文鏈接:http://sikaile.net/kejilunwen/jixiegongcheng/1548092.html