本文關鍵詞： 數字調速閥 先導控制 數字仿真　出處：《機床與液壓》2016年06期 　論文類型：期刊論文

【摘要】：調速閥一般由定差減壓閥和節流閥串聯組成。當其工作在大壓差、大流量場合下,布置在主回路上的減壓閥壓力損失大,會帶來油液溫升等問題。提出一種先導數字調速閥,主閥為流量放大原理插裝閥,先導閥為由高速開關閥與定差減壓閥串聯組成的數字調速閥。高速開關閥為PWM控制數字閥,節流損失小、重復性好、抗干擾能力強。將定差減壓閥應用在先導回路,由于控制流量小,可有效解決壓力損失大、發熱大問題。通過理論推導和仿真研究,驗證了該閥可行性,并得出該閥性能與結構參數之間的關系,為其設計提供了理論基礎。
[Abstract]:The speed regulating valve is usually composed of a constant differential pressure reducing valve and a throttle valve in series. When the valve operates under the condition of large pressure difference and large flow rate, the pressure loss of the pressure reducing valve arranged on the main circuit is large, which will bring about the oil temperature rise and so on. This paper presents a pilot digital speed regulating valve. The main valve is the cartridge valve of flow amplification principle, the pilot valve is a digital speed regulating valve composed of high speed switch valve and fixed differential pressure reducing valve in series. The high speed switch valve is a digital valve controlled by PWM, with small throttle loss and good repeatability. The pressure reducing valve with fixed difference is used in the pilot circuit. Because of the small flow control, it can effectively solve the problems of large pressure loss and large heat. The feasibility of the valve is verified by theoretical derivation and simulation research. The relationship between the performance and structure parameters of the valve is obtained, which provides a theoretical basis for its design.
【作者單位】： 太原理工大學新型傳感器與智能控制教育部與山西省重點實驗室;太重榆次液壓工業有限公司技術中心;
【基金】：supported by National Natural Science Foundation of China ( No. 51205271) Specialized Research Fund for the Doctoral Program of Higher Education ( No. 20121402120002)
【分類號】：TH134

【相似文獻】

相關期刊論文 前10條

1 汪大鵬;調速閥的新結構[J];機床與液壓;1997年06期

2 王小紅;新型調速閥[J];青海大學學報(自然科學版);1998年03期

3 劉同義,許同樂;普通與液動調速閥區別及分析[J];機電國際市場;2000年02期

4 王榮杰;兩種減壓調速閥的對比分析[J];煤礦機電;2001年05期

5 王偉;使用調速閥應注意的問題[J];機床與液壓;2004年05期

6 ;調速閥的常見故障排除技巧[J];液壓氣動與密封;2010年04期

7 嚴桃平;;調速閥的兩種常見結構分析及選用[J];機床與液壓;2010年12期

8 彭剛;周維科;;一種新型二通調速閥的結構分析與應用[J];液壓氣動與密封;2011年01期

9 高德林;;對調速閥動態分析的幾點看法[J];液壓工業;1983年03期

10 巫嘉耀;小流量單向行程調速閥的研制[J];液壓與氣動;1985年02期

相關會議論文 前1條

1 童吉瓊;張炳安;徐寶富;;PVC型材加工中的氣功調速技術[A];中國工程機械學會2003年年會論文集[C];2003年

相關重要報紙文章 前1條

1 ;江南閥門再創佳績[N];科技日?qǐng)?bào);2000年

，

本文編號：1517468