本文關鍵詞：渦旋式濾油機真空泵型線設計理論及其本源特性研究　出處：《重慶工商大學》2012年碩士論文　論文類型：學位論文

  更多相關文章： 資源 環境污染 真空泵 型線理論 壁厚變化

【摘要】：由于石油資源導致的能源短缺問題和環境污染問題，使得對廢舊油液的凈化、再生技術和設備受到越來越多的關注與重視�，F(xiàn)有濾油機存在脫水效率低等問題。為了改善這一狀況，提出將真空泵應用至濾油機以改善濾油機的工作真空度，從而降低濾油機的工作能耗，提高濾油機的工作效率。真空泵借助真空技術的發展，在性能和結構上具有諸多優勢，其應用領域也越來越廣泛，且在多種環保設備方面得以應用。渦旋真空泵的性能由真空泵型線所決定，因此，為了了解及改善真空泵，我們首先應該從理論上分析渦旋型線的特性。 本文首先從真空技術出發，說明了真空泵的發展與應用，指出真空泵的性能由型線決定。而型線的構成需要符合一定的原則，通過分析型線的坐標變換和笛卡爾坐標表達式表示的一些數學意義，說明了型線構成的理論基礎，為通用渦旋型線的建立提供依據。 根據單一渦旋型線的共性，構造出通用渦旋型線。分析了通用渦旋型線構建的意義及其型線本身具有的數學性質。通過通用渦旋型線參數取值不同，得出不同的基礎型線，說明通用渦旋型線的本源特性既是各種單一型線的集合，其本身又是一種新型的型線，能表征型線的變化規律。 基于通用渦旋型線的優點，從數學角度出發，分析了通用渦旋型線表達式表征的型線構成的渦旋盤具有的厚度變化規律。利用軟件MATLAB，，繪制出相應的渦旋盤圖形，證實了前面理論分析的正確性。得出結論是當k=2時渦旋盤是等壁厚的，而k大于等于3時的渦旋盤就為變壁厚，且隨著k值的增大，渦旋盤厚度變化趨勢也在加大。而變壁厚渦旋盤在整體性能上是優于等壁厚的，說明對渦旋型線表征的渦旋盤厚度的變化是有意義的。
[Abstract]:Because of the energy shortage and environmental pollution problems caused by oil resources, so the purification of waste oil recycling technology and equipment, it is paid more and more attention. The low efficiency of the existing problem of the dehydration of oil filter. In order to improve this situation, put forward to improve the machine oil filter vacuum filter used to work oil vacuum pump, thereby reducing the energy consumption of oil filter oil filter work, improve the working efficiency of the vacuum pump. With the development of vacuum technology, has many advantages in performance and structure, its application is more and more widely, and can be used in a variety of environmental protection equipment. The performance of scroll vacuum pump by vacuum pump therefore, the line type decision, in order to understand and improve the vacuum pump, we should first analysis of characteristics of vortex type line in theory.
This paper from the vacuum technology of the development and application of vacuum pump, vacuum pump and pointed out that the performance is determined by the type of line. Which type line need to comply with certain principles, some mathematical meaning by analyzing the profile of coordinate transformation and Descartes coordinate expressions, and illustrates the theoretical basis of line form, as the general typevortex line provides the basis for the establishment.
According to the commonality of a single vortex line, constructed the general vortex type line. Analysis of the mathematical properties of meaning and type of general type vortex line construction of the line itself has. The general type vortex line parameters of different type, different from base line, single line source set is characteristic of general scroll profiles., which itself is also a kind of new type line, changes can represent the type line.
The advantages of general type vortex line from the point of view of mathematics, based on the analysis of the thickness variation of scroll plate profile of general type vortex line which has the expression characterization. Using the MATLAB software, draw the corresponding graphics scroll, verified the previous theoretical analysis. The conclusion is that when k=2 is scroll such as the wall thickness of K is greater than or equal to 3 when the scroll for variable thickness, and with the increase of K value, the change trend of the scroll plate thickness is also increasing. While the variable thickness scroll in the overall performance is better than the wall thickness, changes of scroll plate thickness on the scroll table syndrome the is of significant importance.

【學位授予單位】：重慶工商大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH45

【參考文獻】

相關期刊論文 前4條

1 張賢明;賈玉梅;李川;焦昭杰;顧宏;;油液的污染度評價及其測試技術[J];汽輪機技術;2007年01期

2 賈曉鳴,馮喜京,孔淑芳,張秀玲,張好強,張建會;汽輪機油中水分的危害及凈化[J];潤滑油;2003年04期

3 屈宗長,李元鶴,王開寧,王迪生;轉速對渦旋壓縮機性能的影響[J];陜西工學院學報;1997年04期

4 王君;李雪琴;;雙渦旋齒渦旋機械漸變壁厚型線的構建[J];中國石油大學學報(自然科學版);2008年03期

本文編號：1413453