本文關鍵詞：多功能液壓千斤頂產品配置設計技術研究與應用　出處：《杭州電子科技大學》2012年碩士論文　論文類型：學位論文

  更多相關文章： 配置設計 事物特性單元 配置模型 實例推理 變型設計

【摘要】：當今市場,企業在不斷地縮減產品成本,同時客戶對產品的個性化需求也在不斷提高。在這種背景下,大批量定制理論孕育而生,大批量定制理論不但能最大限度的降低產品成本,同時也能夠滿足客戶多樣化的需求。作為大批量定制理論的核心內容,產品配置設計近些年備受各界關注。 本文較為系統地研究了產品配置設計理論,產品配置建模、產品配置推理和評價方法,提出了基于事物特性表和知識的產品配置建模方法與基于實例的產品配置推理方法,并將其應用到多功能液壓千斤頂產品中,開發了多功能液壓千斤頂產品配置設計系統。具體內容包括： 第一章,闡述了論文研究的背景及其意義,論述了產品配置設計關鍵技術的發展及國內外現狀,并對產品配置設計的各種理論方法進行了對比,最后介紹了論文的主要研究?jī)?nèi)容和總體結構。 第二章,詳述了產品配置設計的基本理論及其配置設計過程,并針對多功能液壓千斤頂產品進行了可配置性分析,給出了配置設計流程,最后對客戶的個性化需求進行了分析,獲取了多功能液壓千斤頂產品客戶的需求狀況,并在確定客戶需求權重之后,將其轉化為產品訂單信息。 第三章,主要研究了多功能液壓千斤頂產品的配置建模過程,分別介紹了事物特性表的理論及其結構以及多功能液壓千斤頂產品配置知識庫的構建過程,給出了基于事物特性表的事物特性單元模型,在此基礎上結合產品配置知識庫,構建了基于事物特性表和知識的多功能液壓千斤頂產品配置模型。 第四章,詳述了基于實例的產品配置推理方法。根據客戶的個性化需求,對現有產品實例庫進行檢索,從而得到滿足客戶個性化需求的產品配置實例集,然后應用配置推理機制確定最能滿足客戶需求的多功能液壓千斤頂產品配置實例；之后簡述了如何利用層次分析法對配置結果進行評價；對于不能得出產品配置方案的情況,可以對現有實例進行零部件變形設計以得到所需配置方案。 第五章,在上述理論研究的基礎上,開發了多功能液壓千斤頂產品的配置設計系統,介紹了系統開發的目標及其運行環境,給出了系統的總體框架,最后詳述了系統的各個功能模塊。 第六章,對論文的主要研究?jī)?nèi)容進行了總結,并給出了今后的研究方向。
[Abstract]:In today's market, enterprises are constantly reducing the cost of products, while customers' demand for personalized products is also increasing. Under this background, mass customization theory is born. Mass customization theory can not only minimize the cost of products, but also meet the diverse needs of customers. As the core content of mass customization theory, product configuration design has attracted much attention in recent years. This paper systematically studies the theory of product configuration design, product configuration modeling, product configuration reasoning and evaluation methods. Product configuration modeling method and case-based product configuration reasoning method based on transaction characteristic table and knowledge are proposed and applied to multi-function hydraulic Jack products. A multi-function hydraulic Jack product configuration design system is developed, including: In the first chapter, the background and significance of the research are described, the development of key technologies of product configuration design and the present situation at home and abroad are discussed, and various theories and methods of product configuration design are compared. Finally, the main research content and the overall structure of the thesis are introduced. In the second chapter, the basic theory of product configuration design and its configuration design process are described in detail, and the configurable analysis of multi-function hydraulic Jack products is carried out, and the configuration design flow is given. Finally, the individualized requirements of customers are analyzed, and the demand status of multi-function hydraulic Jack products is obtained. After determining the weight of customer demand, it is transformed into product order information. In the third chapter, the configuration modeling process of multi-function hydraulic Jack product is studied, and the theory and structure of object characteristic table and the construction process of configuration knowledge base of multi-function hydraulic Jack product are introduced respectively. This paper presents a model of thing characteristic unit based on the tabular property of things. Based on the product configuration knowledge base, the product configuration model of multi-function hydraulic Jack is constructed based on the tabular and knowledge of the product characteristics. In Chapter 4th, the case-based reasoning method of product configuration is described in detail. According to the customer's personalized requirements, the existing product case library is retrieved, and the product configuration case set is obtained to meet the customer's personalized requirements. Then the configuration reasoning mechanism is applied to determine the multi-function hydraulic Jack product configuration example which can meet the customer's needs most. After that, it briefly describes how to use AHP to evaluate the configuration results. For the cases where the product configuration scheme can not be obtained, the part deformation design can be carried out to obtain the required configuration scheme. In Chapter 5th, on the basis of the above theoretical research, the configuration design system of multi-function hydraulic Jack product is developed, the goal of the system development and its running environment are introduced, and the overall framework of the system is given. At last, each function module of the system is described in detail. In chapter 6th, the main research contents are summarized, and the future research direction is given.
【學位授予單位】：杭州電子科技大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH211.1

【參考文獻】

相關期刊論文 前10條

1 李偉,劉光復,張孟青;一種基于約束滿足問題的產品配置方法[J];成組技術與生產現代化;2004年02期

2 姜軍;宋保維;常明;梁慶衛;;基于AHP的模糊權重評定方法[J];彈箭與制導學報;2007年01期

3 覃燕紅;但斌;張旭梅;;基于模塊化產品族與客戶需求轉化的產品配置[J];工業工程與管理;2008年01期

4 朱斌;王展;楊海成;;基于顧客不確定需求的產品配置方法[J];航空制造技術;2008年05期

5 朱承,曹澤文,張維明;知識庫系統建�？蚣艿陌l(fā)展與現狀[J];計算機工程;2002年08期

6 譚建榮,李濤,戴若夷;支持大批量定制的產品配置設計系統的研究[J];計算機輔助設計與圖形學學報;2003年08期

7 王世偉,譚建榮,張樹有,紀楊建;基于GBOM的產品配置研究[J];計算機輔助設計與圖形學學報;2004年05期

8 張勁松,王啟富,萬立,鐘毅芳;基于本體的產品配置建模研究[J];計算機集成制造系統-CIMS;2003年05期

9 舒啟林;趙靜;;基于客戶定制的產品配置[J];計算機應用;2007年S2期

10 肖剛,王昌建,程振波,張?jiān)Q,單繼宏;基于相關矩陣的產品配置模型和算法實現[J];機械科學與技術;2004年09期

，

本文編號：1391802