本文關鍵詞：4t四向靜壓叉車設計與研究　出處：《長安大學》2012年碩士論文　論文類型：學位論文

  更多相關文章： 四向靜壓叉車 設計方案 動力匹配 穩定性分析 試驗

【摘要】：叉車作為物料搬運的最主要工具之一，廣泛應用于各行各業的物流系統中。四向叉車是叉車的一個品種，集平衡重式叉車、側面叉車的優點于一身，，顯現出它獨有的特點。隨著科學技術的不斷發展，靜壓傳動以其布局靈活、結構簡單、無級調速、控制簡便等優點在叉車行駛系統中得到了越來越多的應用。本文通過對國內外四向靜壓叉車的發展進行分析對比，討論了4t四向靜壓叉車開發的可行性，并研究分析四向叉車的結構特點、工作原理，確定了4t四向靜壓叉車的開發思路及研究方向。 本文對4t四向靜壓叉車的總體方案，工作原理、主要技術參數確定、主要配套件選型、各部件結構原理及試驗進行了分析研究。從整機重量的估算、發動機的選取、驅動系統配套確定、車速與驅動力的計算等方面對動力系統的匹配進行了論述；對工作裝置及其液壓系統和主要元器件進行了分析計算；對整機穩定性進行了計算；對試制樣機進行了實驗及分析。 論文基本上囊括了4t四向靜壓叉車開發過程的方方面面，該叉車目前已完成試制試驗。
[Abstract]:As one of the most important tools of material handling, forklift is widely used in the logistics system of various industries. Four-way forklift is a variety of forklift, which combines the advantages of balanced forklift and side forklift. With the continuous development of science and technology, hydrostatic transmission with its flexible layout, simple structure, stepless speed regulation. The advantages of easy control have been applied more and more in forklift driving system. This paper analyzes and compares the development of 4t four-direction static forklift at home and abroad, and discusses the feasibility of developing 4t four-way static forklift. The structure characteristics and working principle of four-direction forklift are studied and analyzed, and the development idea and research direction of 4t four-direction static pressure forklift are determined. In this paper, the overall scheme, working principle, main technical parameters of 4t four-direction static pressure forklift, the selection of main fittings, the structure principle of each component and the test are analyzed and studied, and the weight estimation of the whole machine is carried out. The selection of engine, the determination of driving system and the calculation of speed and driving force are discussed in this paper. The working device, its hydraulic system and main components are analyzed and calculated. The stability of the whole machine is calculated. The experiment and analysis of the prototype are carried out. The paper basically covers all aspects of the development process of 4t four-direction static pressure forklift, which has now completed the trial production test.
【學位授予單位】：長安大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH242

【參考文獻】

相關期刊論文 前10條

1 王仙利;;1.25t進箱叉車液壓系統設計[J];叉車技術;2006年04期

2 楊光明;郎咨凱;;靜壓傳動叉車性能探析[J];叉車技術;2008年02期

3 章水;叉車用發動機的現狀及展望[J];工程機械;2000年03期

4 董寶田 ,朱禮遜 ,尚海波 ,賀杰 ,張潤利;液力傳動與靜液壓傳動牽引車的性能對比[J];工程機械;2001年11期

5 張冬林;;內燃叉車的設計要點及技術發展趨勢[J];工程機械;2007年12期

6 周杰，蔡志坡，蕭先鏞;三面叉車橫向穩定性的研究[J];港口裝卸;1996年06期

7 賀毅;;叉車?yán)鋮s系統過熱故障分析與排除[J];叉車技術;2005年03期

8 溫隆生;楊光明;;叉車輪胎的選用與磨損原因分析[J];叉車技術;2006年03期

9 徐慶華;任家權;;叉車排氣系統設計中的幾點要求[J];叉車技術;2007年03期

10 張克軍;;前移式蓄電池叉車工作裝置原理及常見故障[J];叉車技術;2007年04期

相關碩士學位論文 前1條

1 劉洪健;內燃叉車傳動系統動力分析研究[D];中國科學技術大學;2009年

本文編號：1391689