發布時間：2018-01-06 13:41

  本文關鍵詞：基于UG和ADAMS的弧齒圓柱齒輪動力學分析　出處：《組合機床與自動化加工技術》2016年04期 　論文類型：期刊論文

  更多相關文章： 弧齒圓柱齒輪 UG/Open Grip 參數化建模 動力學

【摘要】：根據弧齒圓柱齒輪加工原理及其齒面方程,利用UG/Open Grip二次開發語言在UG中完成齒輪的參數化建模,并實現齒輪副的裝配。應用ADAMS對齒輪副進行動力學仿真,得到其在傳動過程中部分參數特性曲線并對其進行分析。鑒于目前關于弧齒圓柱齒輪的研究沒有成熟的動力學分析成果及計算理論,故將分析結果與同樣參數的直齒、斜齒圓柱齒輪的理論計算值進行對比。結果表明:三者周向力、徑向力及法向力比較接近,弧齒輪副的軸向力呈對稱分布,雖然瞬時值較大但其平均值接近于零。研究結果為弧齒圓柱齒輪的動態特性研究和參數優化提供了技術支撐和理論指導。
[Abstract]:According to the machining principle of arc cylindrical gear and its tooth surface equation, the parametric modeling of gear is completed in UG by using UG/Open Grip secondary development language. And the assembly of gear pair is realized. The dynamic simulation of gear pair is carried out by using ADAMS. The characteristic curves of some parameters in the transmission process are obtained and analyzed. In view of the lack of mature dynamic analysis results and calculation theory about the research of arc tooth cylindrical gear at present. Therefore, the analysis results are compared with the theoretical calculation values of the spur gear and helical cylindrical gear with the same parameters. The results show that the three forces are close to each other, and the axial force of the arc gear pair is symmetrically distributed. Although the instantaneous value is large, the average value is close to zero. The results provide technical support and theoretical guidance for the study of dynamic characteristics and parameter optimization of cylindrical gear with arc teeth.
【作者單位】： 四川大學制造科學與工程學院;
【基金】：國家自然科學基金項目資助(51375320)
【分類號】：TH132.41
【正文快照】： 0引言隨著現代科學技術及工業的迅速發展,齒輪的常規要求已經不能滿足現階段的應用需求,高精度、高效率、低噪聲、小型化等成為熱門的發展方向�；↓X圓柱齒輪作為一種新型齒輪結構,其齒線是一段圓弧且關于中間截面對稱,能夠承受更大的載荷,有更好的傳動平穩性以及更低的傳動噪

【相似文獻】

相關期刊論文 前10條

1 周家年;圓柱齒輪傳動的精度規范[J];航空標準化;1974年03期

2 鄭際漢;;一種新型高強度齒輪——圓弧齒線圓柱齒輪[J];機車電傳動;1986年03期

3 鄒e，

本文編號：1388132